SoloGood 6S F722 60A Stack FC Flight Controller 4in1 ESC 30.5X30.5mm 2-6S for FPV Drone
Buy FPV drone stacks wholesale,pls click Tel：+86 1599973610（whatsapp/wechat） For INAV firmware 8.0 version， pls get them on this google link: https://drive.google.com/file/d/18Oy4F9V97E0qC7jwUlkkTnGLG8i8jWTM/view?usp=sharing Features: Support up to 8 motor outputs to easily build X8 drones. Integrated 5V/10V dual BEC ensures stable operation Four LED status indicators display the working status under different states. Although the flight control is small, it has all five internal components. The F722 main control chip, onboard OSD chip, barometer, and onboard black box chip. The use of large pads ensures that the pads are kept away from components to ensure perfect soldering for beginners. SoloGood 6S F722 Stack: Input voltage: 3-6S Lipo(11v-26v max) Installing Hole: 30.5*30.5mm, M3 Support Protocols: DShot600/300 Weight: 23g FC Specifications Main control: STM32F722RET6 Gyroscope: ICM42688P Barometer: Support ( SPL06 ) OSD: Support (AT7456E) BEC: 10V/2A, 5V/2A UART port: 6 Black box: onboard (16M flash memory) Number of supported motors: M1-M8 Firmware name: BETAFLIGHT: SOLOGOODF722 Input voltage: 3-6S lithium battery (11-30V MAX) Output voltage: VBAT Installation hole: 30.5x30.5mm (4mm aperture) Flight control size: 38.5x38.5mm Weight: 8.1 grams LED status: blue: gyroscope status, green: 3V3 indication, red: 5Vbec indication, white: 10Vbec indication DJI/Vista: Support/6pin Electric regulation TVS protective diode: Yes External capacitor: 1000uF high-frequency low resistance capacitor (included in the packaging) ESC/Motor Protocol: DSHOT300/600 Continuous current: 60A Maximum current :65A Installation hole: 30.5x30.5mm (4mm aperture) Sologood BLS60A 4in1 ESC SPEC: Firmware: BLHELI-S: J-H-30-16.7 Continuous current 60A Maximum current 65A Electric dispatch protocol support: DSHOT300/600 Input voltage: 3-6s Galvanometer: Yes TVS diode protection: Yes External capacitor: 1000UF high-frequency electrolytic capacitor Installation hole position 30.5x30.5mm (4mm hole) Size: 41.5mm X42mm Weight: 15g FAQ: Does this F722 stack support INAV firmware? --- YES Can I turn off 10V VTX power via remote switch?---YES Is the stack compatible with 5/7/8/9/10 inch FPV frames? ---YES