INJORA High Torque N30 PRO NANO Servo with Servo Saver for 1/30 SCX30 (Brass) INJS-N30PRO-B

INJORA High Torque Brass N30 PRO NANO Servo with Servo Saver for 1/30 Axial SCX30 INJORA Brass N30 PRO Servo is a more powerful option for Axial SCX30 builds, designed with a stronger motor, faster response, higher torque, and a brass case that adds front-end weight for climbing stability in heavier or more demanding setups. Features: CNC-machined brass servo case for added weight Metal gear set built to handle higher steering loads Spring-loaded servo saver helps absorb impacts and protect the servo gears Built for heavier SCX30 builds that need stronger and faster steering than the standard N30 servo Specifications: Part Number: N30 PRO Motor Type: Brushed Coreless Gear Type: Metal Case Material: Brass Feedback Type: Potentiometer Operating Voltage: 5–6.0V Control Signal: PWM No-load Speed (6V): 0.045 sec/60° No-load Current (6V): 130mA Stall Torque (6V): 4kgf·cm Stall Current (6V): 1740mA Operating Angle: 180° (500–2500 μsec) Dimensions: 15.8×12.85×21.98mm Wire Length: JR 115mm / 28AWG Weight: 14.5g Waterproof: No Installation Tip: SCX30 uses very small hardware. Use the correct-size driver and light pressure. Tighten only until the screw is seated and snug, then stop. If you feel resistance before it is seated, or if the screw does not thread smoothly, stop and check the alignment before continuing. Package List: 1 × Brass N30 PRO Servo 1 × Servo Saver