Alvins Cables 8K 2.1 Mini HDMI to HDMI Coiled Cable (Nikon D3200/D810/Z6II/Z7II)

Product Description The Alvin's Cables 8K Mini-HDMI to HDMI Coiled Cable is a coiled lead for photographers and videographers whose camera, such as a Nikon D810, Z6 II, or Z7 II, has a mini-HDMI port and needs a tidy link to a monitor, TV, or projector. The cable has a supple TPE jacket that resists knotting and oil, and the coil pulls out to reach then draws back so slack gathers up rather than trailing. The mini-HDMI plug goes to the camera and the full-size plug to the display, and both reinforced aluminium alloy shells hold gold-plated contacts that seat firmly into their ports. Ideal for: Photographers and videographers using cameras with a mini-HDMI output, such as many Nikon and Canon DSLRs, connecting to an HDTV, monitor, or projector. It also carries signal both ways for laptops, tablets, and graphics cards with a mini-HDMI port. Mini-HDMI ports are small and easily strained, and a loose, stiff cable both clutters the setup and tugs at that fragile socket every time the camera moves. This cable answers that with a coil that keeps slack gathered up and heavy shielding that holds the signal clean, while the aluminium shells and gold contacts stand up to repeated use. The result is a tidy, stable connection that eases the load on a small camera port. Key Features Mini-HDMI coiled bi-directional design: The coil retracts to about 35 cm and stretches to roughly 50 cm, and signal passes both ways, so it stays tidy on a mini-HDMI camera while also serving a laptop or tablet feeding a display. HDMI 2.1 up to 8K60 and 4K240: The cable supports 8K at 60 Hz and 4K at up to 240 Hz, so high-resolution stills review and high-frame-rate footage pass through cleanly, with backward compatibility for HDMI 2.0 and 1.4 gear. Quadruple shielding: A tinned-copper winding shield, aluminium foil, mylar, and tinned-copper braid together guard against EMI and RFI, so the picture stays free of black screens, frame loss, and flicker. Durable TPE and aluminium build: The pull, wear, and oil-resistant TPE jacket pairs with reinforced aluminium alloy shells and gold-plated contacts, so the cable resists knotting and the plugs hold their connection over time. Specifications Specification Detail Interface HDMI 2.1, backward compatible with HDMI 2.0 and 1.4, so it also runs with older displays and gear Connectors Mini-HDMI male to full-size HDMI male, matching the mini output found on many Nikon and Canon cameras Direction Bi-directional, carrying signal from mini-HDMI to HDMI or the reverse Cable length 35 cm unstretched, extending to 50 cm coiled (13.8" to 19.7"), so it stays short but reaches a nearby display Maximum resolution 8K at 60 Hz, with support for 4K at 240 Hz, 4K at 144 Hz, and 1080p at 240 Hz Type Passive cable, no external power required, plug in and go Jacket Thermoplastic elastomer (TPE), resistant to pulling, wear, and oil, and slow to knot Shielding Quadruple: tinned-copper winding shield, aluminium foil, mylar, and tinned-copper braid Connector housing Reinforced aluminium alloy with gold-plated contacts What's Included Alvin's Cables 8K Mini-HDMI to HDMI Coiled Cable (35 cm unstretched, 50 cm stretched)