AXIS S1232 32TB Tower Recording Server with 32x AXIS Camera Station Pro Licenses (#02536-006)
Model: AXIS S1232 Who This Is For When a mid to large-scale video surveillance deployment needs a purpose-built recording platform rather than a pieced-together server, the AXIS S1232 32TB Tower Recording Server is the logical starting point. Designed for integrators and IT managers specifying enterprise camera networks across commercial buildings, campus environments, transport hubs, or multi-site corporate premises, this unit ships with 32 AXIS Camera Station Pro licenses already bundled - removing the per-channel licensing conversation from the procurement process. The tower form factor suits server room rack shelving or standalone deployment, while 32TB of onboard storage gives installers a concrete baseline for retention planning before any additional expansion is considered. If your project calls for centralised recording, a professional VMS, and a defined channel count in a single line item, the AXIS S1232 is built squarely for that scope. What This Product Actually Does 32TB Onboard Storage 32TB of pre-installed storage gives installers a defined retention baseline before the project goes live. This eliminates the guesswork of post-installation storage additions and allows accurate retention calculations at the design stage based on channel count, resolution, and frame rate. 32x Camera Station Pro Licenses Included All 32 AXIS Camera Station Pro licenses are bundled with the hardware. There is no separate licensing purchase required to activate the full channel count, which simplifies procurement and removes a common source of project delays on larger deployments. AXIS Camera Station Pro VMS Camera Station Pro is Axis Communications' professional video management platform, supporting live view, recording, playback, event management, and third-party camera integration via ONVIF. It provides a single management interface for operators across multi-camera and multi-site environments. Tower Server Form Factor The tower chassis is suited for installations where a rack is not available or not preferred. It can be placed on a shelf, in a comms room, or alongside existing IT infrastructure without requiring rack rails or additional mounting hardware, keeping installation costs predictable. Purpose-Built for Surveillance Workloads Unlike general-purpose servers repurposed for recording, the AXIS S1232 is validated and tested specifically for continuous 24/7 surveillance recording workloads. This means the hardware and software stack are matched, reducing compatibility troubleshooting during commissioning and ongoing operation. Who Buys This Model Security Integrators: Specifying a complete, validated recording platform for commercial projects where the client expects a single-SKU server-plus-licensing solution rather than separate hardware and software procurement. IT Managers at Medium to Large Organisations: Managing surveillance infrastructure in corporate, healthcare, or education environments where a professional VMS with centralised management and operator access controls is a requirement rather than an option. Facilities and Security Managers: Overseeing 20-32 camera deployments across a single site - such as a commercial building, warehouse complex, or aged care facility - who need onboard storage and licensing accounted for in a single capital purchase. Project Managers Tendering Government or Institutional Contracts: Where the specification requires Axis-validated hardware running Axis native VMS software with documented compatibility, and where open-source or generic server builds are not acceptable. Honest Assessment The AXIS S1232 does two things particularly well: it removes the licensing-hardware mismatch that complicates many enterprise recording deployments, and it delivers a storage baseline - 32TB - that is immediately usable at commissioning without additional procurement steps. The bundled Camera Station Pro licenses are genuine professional-grade software, not a stripped-down version. For integrators quoting projects in the 20-32 camera range, the all-in pricing structure simplifies both the quote and the installation handover. What this server will not do is scale beyond 32 channels without additional licensing, and it is not designed for deployments requiring rack-mounted redundancy or server clustering - those projects should evaluate rackmount or federated server options available through Security Australia. This is a tower unit, so comms room installations requiring 1U or 2U footprints will need a different form factor. Before You Buy Storage Planning: 32TB sounds substantial, but retention duration drops quickly at higher resolutions and frame rates across 32 channels. Before purchasing, run a storage calculator using your target resolution, frame rate, compression type (H.264 vs H.265), and recording schedule. At 32 cameras recording continuously at 1080p H.265, 32TB typically yields between 15 and 30 days retention depending on scene complexity - confirm this against your project's retention requirements before committing. Network Infrastructure: A 32-channel recording server will generate significant sustained network traffic from camera streams. Ensure your switch infrastructure can handle the aggregate bandwidth of all connected cameras simultaneously, and that the server is connected via Gigabit Ethernet as a minimum. Confirm your network switch has sufficient PoE budget if cameras are PoE-powered from the same infrastructure. Quick Fit Check Good match if: Your project requires up to 32 cameras with professional VMS software and you want hardware and licensing bundled into a single procurement line item - the S1232 delivers exactly that without requiring separate license key purchases. Good match if: Your installation site has a server room or comms area that can accommodate a tower chassis and your camera count falls within the 32-channel ceiling of the included Camera Station Pro licenses. You may need a different model if: Your project requires more than 32 channels, rack-mount form factor for a structured comms cabinet, or enterprise-grade server redundancy with hot-swap power supplies - a rackmount recording server or federated multi-server architecture would be more appropriate. Key Features & Technical Specifications Model AXIS S1232 Tower Recording Server Part Number 02536-006 Form Factor Tower Storage Capacity 32TB Included Licenses 32x AXIS Camera Station Pro Video Management Software AXIS Camera Station Pro Maximum Channel Count 32 channels (per included licenses) Brand Axis Communications Camera Compatibility Axis network cameras; ONVIF-compatible third-party cameras Intended Use Continuous 24/7 surveillance recording, commercial and enterprise Product Category Network Video Recording Server Real-World Scenarios Commercial Office Building A 10-storey commercial office building with cameras across entry points, lift lobbies, car parks, and rooftop plant areas deploys the S1232 in the basement comms room. All 32 Camera Station Pro licenses are consumed across the full site with a single server and no additional licensing outlay. Aged Care Facility A residential aged care operator installs the S1232 to centralise recording across internal corridors, entry points, and outdoor walkways. The 32TB storage base provides extended retention for incident review, and Camera Station Pro's operator access controls allow staff to be granted view-only or review access without administrator rights. University Campus Building A university deploys the S1232 to service a single faculty building as part of a campus-wide roll-out where each building receives its own dedicated server. The tower form factor fits in the existing IT room without rack infrastructure, and Camera Station Pro connects to the campus network for central security desk monitoring. Warehouse and Distribution Centre A logistics operator covering dock doors, internal bays, and perimeter fence lines with up to 32 cameras installs the S1232 in the site office server room. The bundled licensing removes per-channel costs from the project budget, and the 32TB storage base supports multi-week retention for insurance and incident documentation purposes. Government Tender Project An integrator responding to a government facility tender specifies the S1232 because the project requires validated Axis hardware running Axis native VMS software. The single-SKU bundle simplifies the bill of materials, and the Camera Station Pro platform meets the specification's requirement for a professional, auditable VMS environment. How It Compares Choose this if: Your project requires up to 32 channels with a professional VMS and you want a validated, purpose-built tower recording server with all licensing included in a single purchase - avoiding the separate hardware-plus-software procurement process. You may need a different model if: Your camera count exceeds 32 channels, your comms room requires rack-mounted servers, or your project demands enterprise server redundancy features - in which case a rackmount recording server or multi-server federated architecture would be more appropriate for your deployment scale. Pairs well with: Axis network cameras (dome, bullet, turret, or PTZ) connected via a managed PoE network switch, with a dedicated UPS to protect the server and connected network infrastructure from power interruption. Common Questions Does the AXIS S1232 include software, or do I need to purchase Camera Station Pro separately? No separate software purchase is required. The AXIS S1232 32TB tower server ships with 32x AXIS Camera Station Pro licenses included in the package. The licenses are pre-associated with the hardware, so there is no separate key activation purchase or licensing portal transaction required to get the full 32-channel VMS up and running at commissioning. Will this server work with non-Axis cameras? Yes, with ONVIF-compatible cameras. AXIS Camera Station Pro supports ONVIF Profile S and Profile T compliant third-party cameras in addition to native Axis devices. However, advanced Axis-specific features such as deep integration with Axis analytics or Axis device management functions will typically only be available when using genuine Axis network cameras rather than third-party ONVIF devices. How long will 32TB of storage last across 32 cameras? It depends heavily on resolution, frame rate, compression codec, and scene activity. As a general guide, 32 cameras recording at 1080p with H.265 compression on a motion-triggered schedule may achieve 30 or more days of retention, while 32 cameras recording continuously at higher resolutions with H.264 will consume storage significantly faster. Run a storage calculator with your specific project parameters before finalising the purchase to confirm 32TB meets your retention requirements. Can I add more than 32 cameras to this server later? The included bundle covers 32 channels. Additional AXIS Camera Station Pro channel licenses can be purchased separately to expand beyond 32 channels on the same server hardware, subject to the server's processing and storage capacity at the time. If your project scope is likely to grow significantly beyond 32 cameras, factor the cost of additional licenses into your long-term planning before committing to this unit. Does this server need to be rack-mounted? No. The AXIS S1232 is a tower form factor server, meaning it is designed to sit upright on a shelf or floor surface without rack rails. It is not designed for standard 19-inch rack installation. If your comms room requires a rack-mounted recording server, a different form factor from the Axis server range would be the appropriate choice - the Security Australia catalogue includes alternative recording server options for that installation scenario. What network connectivity does the S1232 require? The server connects to your IP camera network via standard Ethernet. Gigabit Ethernet is the minimum recommended connection given the aggregate bandwidth that 32 simultaneous camera streams will generate. The cameras themselves connect to your PoE switch infrastructure - the recording server connects to the same network switch, not directly to each camera. Ensure your core switch has adequate Gigabit uplink capacity to handle concurrent recording traffic from all active channels. Is AXIS Camera Station Pro suitable for multi-operator environments? Yes. Camera Station Pro supports role-based user access, meaning individual operators can be granted specific permission levels - such as live view only, playback access, or export rights - without being given full administrator access to the system. This is relevant for environments such as aged care, corporate, or government facilities where multiple staff require access to footage at different authorisation levels. Downloads & Resources No downloads available for this product.