Ravek Can-Am Defender HD11 Speakeasy™ Turn Signal Kit w/ Signature Lights - Lever
Speakeasy™ takes the headache out of one of the worst parts of installing a traditional UTV turn signal kit: running wiring from the front of the machine all the way to the rear and tearing apart the cab just to get it there. Instead of routing a wire harness through the entire vehicle, Speakeasy™ uses a dedicated wireless connection between the front control module and rear receiver. The front of the system uses plug-and-play wired connections for the turn signal controls, horn, hazards, and indicators, while the rear receiver connects directly to the factory taillights. The result is a cleaner, faster installation with no front-to-rear wire routing and no unnecessary cab teardown. Once installed, the wireless connection happens automatically every time the machine is powered on. There’s no app, no manual pairing, and nothing extra for the driver to do. A Complete, Street-Ready Turn Signal System Speakeasy™ gives you everything needed for a clean, fully integrated turn signal setup. Vehicle-Specific Controls Steering-column-mounted turn signal lever with a vehicle-specific steel mounting bracket for an OEM-style fit and feel. Rocker switch configuration available where preferred. Integrated controls for left and right turn signals, horn, and hazards. Front Lighting IP67-rated Apex front running lights and turn signals. Bright white running lights automatically switch to amber for turn signals and hazards. Vehicle-specific mounting locations and necessary installation hardware included. Speakeasy™ Wireless Front-to-Rear Connection Front Control Module mounts under the hood and connects to accessory power, turn signal controls, horn, hazards, and dash indicators. Rear Receiver mounts at the rear of the machine and connects directly to the OEM taillight system. Factory taillights flash in sync with the front turn signals. Front and rear modules connect wirelessly every time the UTV powers on. No app. No pairing. No wiring through the cab. Additional Features OEM-integrated dash indicators for clear visibility from the driver's seat. Auto-canceling turn signals with intelligent delay and extended-blink functionality. Emergency Mode: Hold the hazard control for five seconds to activate a 360° chase pattern. Horn, hazard functionality, and license plate holder included. Built for a Cleaner Install Speakeasy™ is designed with both the technician and the finished machine in mind. By eliminating the need to route turn signal wiring from the front of the UTV to the rear, the system reduces unnecessary disassembly, keeps the installation clean, and provides the integrated functionality you'd expect from a properly equipped machine. The end result is a professional, OEM-style turn signal system without unnecessarily tearing apart the cab to install it. Every Speakeasy™ kit is backed by RAVEK's Unlimited Lifetime Warranty. ⚠ Street-Legal Notice Installing a turn signal kit does not automatically make a UTV or side-by-side legal for operation on public roads. Street-legal requirements vary by state, county, and municipality, and some jurisdictions may not permit UTVs on public roads regardless of installed equipment. It is the vehicle owner's responsibility to understand and comply with all applicable local laws and requirements before operating the vehicle on any public roadway.