Sony Cyber-shot DSC-RX10 III Digital Camera - Preowned
Features: 20.1MP 1" Exmor RS BSI CMOS Sensor BIONZ X Image Processor Zeiss Vario-Sonnar T* f/2.4-4 Zoom Lens 24-600mm (35mm Equivalent) 2.36m-Dot OLED Tru-Finder EVF 3.0" 1.228m-Dot Tilting Xtra Fine LCD UHD 4K30 Video, Full HD 1080p at 960 fps Built-In Wi-Fi with NFC ISO 12800 and 14 fps Continuous Shooting Optical SteadyShot Image Stabilization The Cyber-shot DSC-RX10 III from Sony is a versatile digital camera optimized for multimedia image-makers working in a wide variety of situations. Featuring a large 20.1MP 1" Exmor RS CMOS sensor, which utilizes both back-illuminated and stacked technologies, a high degree of image quality can be attained, with notable clarity, reduced noise, and sensitivity to ISO 12800. The sensor's design also integrates a dedicated DRAM chip to provide faster readout speeds that, when combined with the BIONZ X image processor, enable fast continuous shooting up to 14 fps. This also helps to reduce unwanted distortion caused by rolling shutter, and permits recording UHD 4K30 video internally, as well as slow motion Full HD 1080p video at 960 fps. Equally as impressive as the imaging capabilities, the RX10 III is also characterized by its 25x Zeiss Vario-Sonnar T* zoom lens, which spans an impressive 24-600mm equivalent focal length range and uses Optical SteadyShot image stabilization to minimize the effects of camera shake. Its optical design incorporates eight extra-low dispersion elements and six aspherical elements to control a variety of aberrations throughout the zoom range, and its f/2.4-4 maximum aperture range benefits working in low-light conditions. Mixing speed and reach, the RX10 III is well-suited to the photographer or videographer looking for an all-in-one camera to handle a variety of working situations. 20.1MP 1" Exmor RS BSI CMOS Sensor and BIONZ X Image Processor A large 1" 20.1MP Exmor RS CMOS sensor pairs with the BIONZ X image processor to realize a high degree of image clarity with reduced noise levels to support working in a wide array of environments with sensitivities up to ISO 12800. The Exmor RS sensor employs a unique stacked structure with a back-illuminated design for efficient light-gathering abilities, as well as faster performance. The design also incorporates a dedicated DRAM chip on the back of the sensor to facilitate quick image processing in order to boost signal capacity and readout speeds for quick continuous shooting, up to 14 fps with reduced blackout, and slow motion video recording at up to 960 fps. An Anti-Distortion Shutter is also a product of the fast readout speeds, and helps to greatly reduce unwanted distortion caused by rolling shutter effects. The sensor and processor also contribute to fast autofocus performance that benefits both stills shooting and video recording. This Fast Intelligent AF system is able to achieve precise focus in as little as 0.09 seconds to suit working with quickly moving subjects. By continuously tracking and assessing subjects, the focusing system is able to quickly lock onto subjects prior to half-pressing the shutter button, and a subject detection algorithm then intelligently predicts the proper point of focus to aid in acquiring sharp imagery of moving subjects. Zeiss Vario-Sonnar T* 25x Zoom Lens Pairing with the imaging assets, the RX10 III is most distinctly characterized by its expansive 25x zoom lens. This Zeiss Vario-Sonnar T* lens spans a 24-600mm equivalent focal length range, and has a variable maximum aperture of f/2.4-4 for adept performance from wide-angle to super telephoto. The optical design incorporates five extra-low dispersion elements, two extra-low dispersion aspherical elements, and one Super ED element to control a range of chromatic aberrations throughout the zoom range for increased clarity and color accuracy. An advanced aspherical (AA) element and five aspherical elements are also featured to reduce spherical aberrations for improved sharpness and resolution. Additionally, the esteemed Zeiss T* anti-reflective coating has been applied to individual elements to reduce flare and ghosting for increased contrast when working in strong lighting conditions. Complementing the lens' reach, Optical SteadyShot image stabilization also helps to minimize the appearance of camera shake by up to 4.5 stops for sharper handheld shooting. The lens also sports a rounded nine-blade diaphragm to produce smooth bokeh, and, despite its long reach, can also focus as closely as 1.2" with a 0.42x maximum magnification for working with close-up subjects. UHD 4K Video Recording Internal video recording is possible in a range of resolutions up to UHD 4K30 as well as high-speed recording in Full HD 1080p at 120 fps. Recording is done using full pixel readout, without pixel binning, in order to avoid the occurrence of moiré and jaggies, and the fast readout speeds of the sensor help to avoid moving subject distortion due to the effects of rolling shutter. Both 4K and Full HD recording are possible in the 100 Mbps XAVC S format, which is contained within an MP4 wrapper, with 4:2:0 color sampling when recording internally, or 4:2:2 sampling with the use of an optional external recorder via HDMI output. Making use of the back-illuminated sensor design, customizable picture profiles, color settings, and gamma controls are also available to effectively extend the possible dynamic range. Users can adjust the gamma, black level, knee, color level, and more. Also, users can use the same S-Log2 Gamma Curve that is found on high-end Sony Cinema cameras that squeezes up to 1300% more dynamic range into the video signal than traditional REC709, for increased post-production flexibility. Multiple timecode recording and user bit options are also provided to suit different editing workflows. Beyond UHD 4K recording, the RX10 III also makes use of the fast readout speeds by way of availing a range of high frame rate (HFR) recording settings, with the ability to record Full HD movies at up to 960 fps for 40x slow motion playback. Body Design and Built-In Wi-Fi A bright, high-resolution XGA OLED Tru-Finder sports a 2.36m-dot resolution for clear eye-level monitoring of the scene, as well as the ability to preview exposure adjustments prior to shooting. Alternatively, a rear 3.0" 1.228m-dot Xtra Fine TFT LCD is available for monitoring and review, and features a 107° upward, 42° downward tilting design to benefit working from high and low angles. The screen also uses WhiteMagic technology for improved visibility in bright conditions. A robust magnesium-alloy body design is both dust- and moisture-resistant to support use in harsh environments. The manually operated aperture ring permits intuitive tactile control over exposure settings, and the ring can be de-clicked for smooth, silent performance to suit video applications. Manual focus and zoom rings are also incorporated in the lens' design. A top LCD panel can be used to quickly check key exposure and other settings. A range of customizable function buttons can be assigned to any one of 58 different custom functions. The included NP-FW50 rechargeable lithium-ion battery offers approximately 420 shots per charge when working with the LCD monitor, or 370 shots per charge when working with the EVF. Both an external microphone jack and a headphone jack are available for using optional external mics and monitoring your audio in real time. Built-in Wi-Fi with NFC permits wirelessly sharing imagery to a linked mobile device for instant sharing online, and also allows a smartphone or tablet to remotely control the camera or display a live view image. Mobile devices can be paired via NFC or via a QR code displayed on the camera for non-NFC-enabled phones or tablets. PlayMemories Camera Apps are also supported via the built-in Wi-Fi connection, and allow you to personalize the camera's features depending on specific shooting styles. Apps are available to suit creating portraits, detailed close-ups, sports, time-lapse, motion shot, and other specific types of imagery.