Liquid/Liquid Membrane Separator GMS205L
GMS205L Liquid/Liquid Membrane Separator The Headline Filters GMS205L is a high-pressure membrane separator specifically designed to remove water and other high-surface-tension liquids from liquid hydrocarbon sample streams. Unlike conventional gas/liquid membrane separators, the GMS205L uses a specialised M3 PTFE liquid/liquid separation membrane. The membrane selectively prevents entrained water droplets from passing through while allowing the hydrocarbon liquid sample to flow through to the analyser. This makes the GMS205L particularly suitable for protecting liquid analysers where small quantities of immiscible water may be present in gasoline, kerosene, diesel and other hydrocarbon sample streams. How It Works The incoming liquid sample contacts the M3 membrane. Hydrocarbon liquid passes through the microscopic membrane structure to the clean sample outlet, while water and other high-surface-tension liquids are rejected by the membrane and remain on the upstream side. This provides continuous liquid/liquid separation without changing the properties of the hydrocarbon sample being delivered to the analyser. Key Features Specifically designed for liquid/liquid separation Removes water from liquid hydrocarbon sample streams Specialised M3 PTFE membrane 0.8 µm membrane pore size 316L stainless steel construction Maximum working pressure: 100 bar Maximum operating temperature: 150°C 1/4" and 1/2" NPT versions available Integral mounting arrangement Replaceable membrane kit Designed to protect liquid analysers Suitable for refinery, petrochemical, fuel and sample conditioning applications Choose Your Port Size 1/4" NPT Headline Model: GMS205L-1/4"-MT61-M3 SKU: 29200064 1/4" NPT process connections 1/4" NPT drain/gauge connection 316L stainless steel Supplied with MT61-M3 liquid/liquid membrane 1/2" NPT Headline Model: GMS205L-1/2"-MT61-M3 SKU: 29200095 1/2" NPT process connections 1/2" NPT drain/gauge connection 316L stainless steel Supplied with MT61-M3 liquid/liquid membrane M3 Liquid/Liquid Membrane The GMS205L uses the MT61-M3 membrane specifically developed for water/hydrocarbon separation. Membrane material: PTFE Membrane diameter: 61 mm Membrane thickness: 150 µm Membrane pore size: 0.8 µm Maximum temperature: 150°C A replacement MT61-M3 membrane kit is available separately. Headline Replacement Membrane Kit: MT61-M3 SKU: 36000316 Liquid Flow Performance Flow through the M3 membrane depends on the hydrocarbon being sampled and the differential pressure across the membrane. Sample Liquid Flow at 1.5 psid Flow at 15 psid Gasoline 65 cc/min 650 cc/min Kerosene 29 cc/min 290 cc/min Diesel 22 cc/min 220 cc/min For best separation performance, the differential pressure across the M3 membrane should not exceed 15 psid, helping to prevent water breakthrough. The differential pressure across the membrane must also remain below the sample stream pressure. Technical Specification Housing Material: 316L Stainless Steel Maximum Working Pressure: 100 bar Maximum Temperature: 150°C / 300°F Port Sizes: 1/4" NPT or 1/2" NPT Internal Sample Volume Behind Membrane: 19.69 cc Standard Seal: Viton® Membrane: MT61-M3 Membrane Material: PTFE Membrane Rating: 0.8 µm Application: Water / Hydrocarbon Liquid-Liquid Separation Typical Applications Liquid analyser sample conditioning Water removal from hydrocarbon samples Gasoline sampling Kerosene sampling Diesel sampling CNG and LNG sampling systems Refinery analyser systems Petrochemical sample conditioning Fuel quality analysis Protection of liquid analysers Alternative Materials Alternative housing materials, including Alloy C-276, are available for demanding or corrosive applications. Please contact Headline Filters for selection and availability. If you are unsure whether the GMS205L is suitable for your liquid sample, please contact Headline Filters for technical assistance.