Oxva VPrime 2 Pod Vape Kit

OXVA VPrime 2 Pod Kit is a 60W refillable pod kit built around a 3400mAh battery and UniTech 3.0 dual mesh pods. Draw on the mouthpiece and the coil fires on its own, with no button needed anywhere in the 5W to 60W range. OXVA fitted a 0.98 inch colour screen, 5V/3A fast charging over USB-C, and switchable Boost and Eco modes. Vape Connect stocks the VPrime 2 in 6 colours across mirage, carbon, and shard finishes. What is OXVA VPrime 2 Pod Kit? OXVA VPrime 2 Pod Kit is a refillable sub-ohm pod system that fires on inhale and runs from 5W to 60W. OXVA built it as the direct follow-up to the original VPrime, keeping the auto-draw concept and rebuilding the hardware around it. 3400mAh battery capacity, 0.98 inches display, and the coil platform steps from UniTech 2.0 to UniTech 3.0, making your vaping unmatched. Each 2ml pod carries its own dual mesh coil, so a tired coil means a fresh pod rather than a fiddly coil change. That 2ml ceiling comes from UK TRPR rules, which cap every tank and pod sold in Britain. OXVA VPrime 2 Specifications OXVA VPrime 2 Vape Kit specifications confirm a 3400mAh battery, a 60W max output, and a 2ml pod capacity set by UK TRPR rules. The table below pairs each attribute with its value. Specification Detail Output 5W to 60W Battery 3400mAh built in Charging USB Type-C, 5V/3A fast charge Display 0.98 inch colour screen Pod Capacity 2ml, the UK TRPR maximum Pods Included 0.4Ω and 0.6Ω VPrime 2 Dual Mesh Coil Technology UniTech 3.0 dual mesh Modes Boost and Eco Activation Ultra-auto draw and fire button Airflow Adjustable, Ergonomic AFC ring Material Zinc alloy and IML Dimensions 113.12mm x 41.2mm x 27.7mm Weight 150g E-Liquid Compatibility Freebase shortfills and nicotine salts Compliance TRPR compliant for legal UK sale Oxva VPrime 2 Dual Mesh Pod Resistance Both Oxva VPrime 2 pods included in the box sit in restricted direct lung territory, with the 0.4Ω running warmer and the 0.6Ω running tighter. Pod Draw Style Wattage Best E-Liquid Dual Mesh 0.4Ω RDL 28W to 38W 50/50 or 70/30 Dual Mesh 0.6Ω RDL 20W to 25W 50/50 0.4Ω VPrime 2 dual mesh pod The 0.4Ω pod opens the draw out and warms the vapour, working best between 28W and 38W. Freebase shortfills at 70/30 suit it, and a 50/50 nic salt works at the lower end of that window. Airflow opened fully turns it into the closest thing the kit offers to a direct lung draw out of the box. 0.6Ω VPrime 2 dual mesh pod The 0.6Ω pod is the gentler of the pair, sitting between 20W and 25W with a tighter draw. Nicotine salts at 10mg or 20mg in a 50/50 base pair with it cleanly, which suits adult smokers in their first months away from cigarettes. Battery life stretches noticeably further on this pod, since the wattage runs lower. OXVA VPrime 2 colour options 6 colours run across 3 finishes on OXVA VPrime 2, with mirage carrying a shifting gradient, carbon a woven matte, and shard a faceted panel. Finish Colours Mirage Mirage Blue, Mirage Purple, Mirage Pink Carbon Black Carbon Shard Shard Black, Shard Gold How to Use OXVA VPrime 2 Pod Vape Kit? To set up OXVA VPrime 2, fill the pod, prime the coil, and set your wattage before the first draw. The five steps below run from unboxing to vaping. Pull the pod from the device and lift the fill plug on the side. Fill the 2ml pod with e-liquid matched to the pod resistance. Press the plug back down and seat the pod firmly in the device. Leave the pod standing for five minutes so the dual mesh coil wicks fully. Set the wattage on the screen to the range for that pod, then draw on the mouthpiece. Skipping the five minute prime burns the cotton and ruins the pod, which is the single most common cause of a burnt taste on a new kit. OXVA VPrime 2 compared with the original OXVA VPrime Every headline change between Oxva VPrime and VPrime 2 sits in the table below, drawn from the specification sheets for each kit. Feature OXVA VPrime OXVA VPrime 2 Battery 2600mAh 3400mAh Charging 5V/2A 5V/3A Screen 0.96 inch 0.98 inch colour Coil Technology UniTech 2.0 UniTech 3.0 dual mesh Modes Wattage only Boost and Eco Max Output 60W 60W Who OXVA VPrime 2 Vape Pod Kit suits? OXVA VPrime 2 Vape suits 4 groups of adult vapers, ranked by how closely the kit matches what they need. Restricted lung vapers who want a warm, airy draw without carrying a box mod and a separate tank. Heavy all-day vapers who drain a 2000mAh pod kit before the evening and need the 3400mAh cell. Auto-draw users who have moved past button-fired devices and want inhale activation at sub-ohm power. Existing OXVA owners who know the UniTech coil platform and want the current generation of it. What is in the OXVA VPrime 2 box? Every OXVA VPrime 2 kit arrives with both pods fitted or boxed, so the device vapes straight out of the packaging once you add e-liquid. 1 x OXVA VPrime 2 pod kit 1 x 0.4Ω VPrime 2 Dual Mesh pod, pre-installed 1 x 0.6Ω VPrime 2 Dual Mesh pod 1 x USB Type-C charging cable 1 x User manual 1 x Use suggestion card