CM.160A 527 PC MECHANICS TOOL SET

This Facom tool set is your personal workshop on wheels. Equipped with an array of specialized instruments meticulously designed for diverse needs, this kit transforms every project into a masterpiece. With essentials such as adjustable wrenches, pin wrenches, pipe wrenches, and a trap wrench, you’ll effortlessly navigate the intricacies of wheel replacement from any angle grinder. But that’s not all – within this treasure trove lies a symphony of functionality. Unveil the remarkable Outside-circlip® and Inside-circlip® pliers, your allies in precision mechanics. Unlock the potential of lockable multi-grip pliers, sheathed combination pliers, and a broad range of specialized pliers that defy limitations. Contents:- 113A (2 pcs.) – Adjustable wrenches 6″ and 10″ 115A.100 (1 pcs.) – Pin wrench 134A.18 (1 pcs.) – Pipe wrench 138A.18 (1 pcs.) – Strap wrench 4″ 167A (3 pcs.) – Outside-circlip® pliers 13 – 18 – 23 169A (3 pcs.) – Inside-circlip® pliers 13 – 18 – 23 181A.25CPE (1 pcs.) – Lockable multigrip pliers 181A.30G (1 pcs.) – Lockable multigrip pliers 185.20CPE (1 pcs.) – Sheathed straight half-round nose pliers 187.18CPE (1 pcs.) – Sheathed combination pliers 188.16CPE (1 pcs.) – Sheathed flat-nose pliers 189.17CPE (1 pcs.) – Sheathed round-nose pliers 191A.18EL (1 pcs.) – Low-effort cutters 192.16CPE (1 pcs.) – Piano wire diagonal cutters 195.20CPE (1 pcs.) – Sheathed angled half-round nose pliers 200H (2 pcs.) – Riveting hammers 24 and 32 mm 208A.32CBA (1 pcs.) – Interchangeable-tip mallets 212A.40 (1 pcs.) – Dead-blow hammer 221.227J2 (41 pcs.) – Tap and die set (in a case) 222A.TJ19 (19 pcs.) – Box set of drill-bits 1 to 10 mm 231 (1 pcs.) – Three-square scraper 234 (1 pcs.) – Scriber 237.A (1 pcs.) – Thread restoring tool 239 (1 pcs.) – Refrigeration” flaring tool (in a case) 239.EA (1 pcs.) – Inch dies 245.J2 (26 pcs.) – Set of gasket punches in a case 247.G (5 pcs.) – Sheathed nail-sets: 2 – 3 – 4 – 6 – 8 mm 249.G (5 pcs.) – Sheathed drift punches set: 2 – 3 – 4 – 6 – 8 mm 256.4 (1 pcs.) – Precision centre punch 4 mm 257.G (1 pcs.) – Sheathed automatic centre punch 263.18 (1 pcs.) – Chisel 265.20 (1 pcs.) – Constant-profile cape chisel 269 (1 pcs.) – Crowbar 285.JS10 (10 pcs.) – Set of stud extractors 31.JE6T (6 pcs.) – Roll set of low profile open-end wrenches 8 to 19 mm 311B.60 (1 pcs.) – Level with protractor dial 334B.35 (1 pcs.) – Tube cutter 3 to 35mm 374A.20 (1 pcs.) – Double-action oil can 39.JE10T (10 pcs.) – Roll set of short combination wrenches 3.2 to 11 mm 401.MT (1 pcs.) – Extra-long flat-nose precision pliers 403.MT (1 pcs.) – Precision angled half-roundnose pliers 405.12MT (1 pcs.) – Precision diagonal cutters 40LA (4 pcs.) – Long combination wrenches 33, 35, 36, 38 mm 43.JE5T (5 pcs.) – Roll set of flare-nut wrenches 7 to 19 mm 44.JE12 (12 pcs.) – Open-end wrenches 6 to 32 mm 440 (6 pcs.) – Combination wrenches 26 to 30 and 32 mm 440.JE18 (18 pcs.) – Combination wrenches 6 to 24 mm 440.JU12 (12 pcs.) – Combination wrenches 1/4″ to 15/16″ 449.Z3A (1 pcs.) – Crimping plier and terminal set 495A.22EL (1 pcs.) – Heavy-duty end nippers 501 (1 pcs.) – Long-nose lock-grip pliers 507A (1 pcs.) – Compact lock-grip pliers 509 (1 pcs.) – Compact lock-grip pliers 521.200 (1 pcs.) – Sliding jaw lock-grip clamp 603F (1 pcs.) – Hacksaw frame 668B.8 (10 pcs.) – Bimetal hacksaw blades 701B (1 pcs.) – Multifunction tester 777B.230 (1 pcs.) – Inspection lamp 804 (1 pcs.) – Feeler gauge, 19 blades 809.J2 (8 pcs.) – Measuring and scribing instrument kit 827B (1 pcs.) – Magnetic retriever 82H.JP9A (9 pcs.) – Sleeve set of hexagonal keys: 1.5 to 10 mm 82H.JU10 (10 pcs.) – Roll of offset hexagonal keys 1/16″ to 3/8″ 830A.10 (1 pcs.) – Ratchet tool-holder 830A.10L (1 pcs.) – Long ratchet tool-holder 834.R2 (1 pcs.) – Articulated mirror 83SH.JP9A (9 pcs.) – Sleeve set of spherical head hex keys 1.5 to 10 mm 840.1 (1 pcs.) – Electricians knife with wire stripper 841 (1 pcs.) – Electricians scissors 84E.J1 (5 pcs.) – Case-set of nut spinners 883B (1 pcs.) – Right-cut scroll shears 887A (1 pcs.) – Nibblers 89.JP8A (8 pcs.) – Torx® keys no. 10 to 45 893.316 (1 pcs.) – Locking tape measure 3 m 94A.JE13T (13 pcs.) – Roll set of nut spinners 3.2 to 14 mm 980C (1 pcs.) – Serrated shears 985761 (1 pcs.) – Automatic wire cutter-stripper 990.B1 (1 pcs.) – Bolt cropper 996.5 (1 pcs.) – Steel cable cutters A.VE (3 pcs.) – 1,000 V insulated screwdrivers slotted head 3.5×100 – 4×100 – 6.5×150 mm AEF.J1 (5 pcs.) – Case set of Micro-Tech® screwdrivers AF (1 pcs.) – Screw starter for slotted heads AN (5 pcs.) – Screwdrivers for slotted heads: 3.5×75 – 4×100 – 5.5×100 mm and short: 4×35 – 6.5×35 mm AND (3 pcs.) – Screwdrivers for Pozidriv® PZ heads no. 0-1-2 ANF (2 pcs.) – Screwdrivers for slotted heads 6.5×150 – 8×200 mm ANP (5 pcs.) – Screwdrivers with Phillips® PH 0-1-2 head and short: 1×35 – 2×35 mm AP.VE (2 pcs.) – 1,000 V insulated screwdrivers Phillips® PH 1×100 – 2×125 AP6X80 (1 pcs.) – Square punch AS.12LTP180T2 (12 pcs.) – Wallet set of needle files, 180 mm AV.HT1B (1 pcs.) – Voltsage tester screwdriver 90 to 480 Volts AWDH3X150 (1 pcs.) – Hexagonal blade screwdriver for Pozidriv® PZ 3 with hexagon shoulder AWH10X175 (1 pcs.) – Hexagonal blade screwdriver for slotted heads with hexagon shoulder AWPH3X150 (1 pcs.) – Hexagonal blade screwdriver for Pozidriv® PZ 3 with hexagon shoulder DELA.1051.05 (1 pcs.) – Rule 300 mm K.432E (16 pcs.) – 3/4″ “truck” sockets and accessories: 30 to 55 mm (in a case) NS.265M (21 pcs.) – Impact screwdriver set with bits NS.500A (26 pcs.) – 1/2″ impact sockets and accessories: 8 to 27 mm R.40U (11 pcs.) – Rack socket-set 3/16″ to 9/16″ RL.NANO1 (38 pcs.) – 1/4″ sockets: 5.5 to 14 mm and accessories (in a case) S.141A (1 pcs.) – 1/2″ long drive hinged handle S.306A200 (1 pcs.) – Torque wrench 40 to 200 Nm S.40U (7 pcs.) – Rack socket-set 3/8″ to 21/32″ S.41U (6 pcs.) – Rack socket-set 11/16″ to 1″ S.440AP (29 pcs.) – 1/2″ Sockets and accessories: 8 to 32 mm (in a case) STG (5 pcs.) – Files T5.L65 (1 pcs.) – Trigger-release lock-grip pliers (with aluminium griping) U.302 (1 pcs.) – 3-leg puller 6 to 80 mm U.306A140 (1 pcs.) – 3-leg puller ø 7 to 140 mm U.306G2 (3 pcs.) – Legs for inside application U.306M (1 pcs.) – Slide hammer Y.RIV1 (1 pcs.) – Riveting kit