Oil pressure / temperature sensor

From Display Generation 4, a combined oil temperature and oil pressure sensor can be connected. The sensor continuously measures both values and is queried by the COREDISPLAY up to 45 times per second. This means that even the smallest deviations in oil pressure are detected immediately - for maximum safety and control. ! No support is provided for installation, as there are too many different engines and installation situations - Please review the instructions beforehand to check if the sensor fits in a suitable location: To the instructions Otherwise, use a reduction nipple / special Y-adapter for engines (e.g. from TL Clubsport) ➡️ Particularly recommended for engines with increased performance or under heavy load ➡️ Recommended for N57 engines – for continuous monitoring of oil pressure and to prevent possible engine damage Requirements COREDISPLAY with Generation 4 technology Software version at least 4.1.0 Devices with a shipping date from 20.04.2026 are directly compatible Older models must be replaced Scope of delivery Combined oil pressure and temperature sensor T-piece with 1x M12x1.5 male, 2x M12x1.5 female, oil pressure switch installation location 3M cable with intermediate connectors for easy routing 3 copper sealing rings Technical data Operating voltage range 4.75V - 5.25V Measuring range Pressure 0.5 to 10.5 bar Temperature measuring range - 40 °C to +160 °C Temperature range - 40 °C to +150 °C Max. temperature 160 °C (max. 100 h - service life) Max. operating pressure 40 bar Protection class IP 69K Overpressure 60 bar Tested ECE-R10