Nukeproof Neutron V2 Freehub Body 36t SRAM XD

Nukeproof Neutron V2 Freehub Body 36T SRAM XD The freehub has been manufactured to the same exacting standards as the freehub on your Nukeproof Neutron V2 hubs. It is only compatible with Nukeproof Neutron V2 Hubs. Key Features: Hard wearing alloy construction 4 Pawl, 36 Points of Engagement. Options: Shimano HG (9,10,11 speed), Shimano Microspline (12 speed), SRAM XD Hub seal and bushing is supplied with the freehub If you're converting from HG/XD to Shimano Microspline you will need the Nukeproof Neutron V2 Microspline Conversion Kit which is sold on a separate page. Installation Instructions: Remove your drive side end cap Remove the freehub by simultaneously turning it (anticlockwise) and pulling. You shouldn't need to apply excessive force to get it off. Check for damage- are the splines in good condition? is the pawl seal still in place? Grease the hub ratchet ring (opposing side of the freehub) Lightly grease the freehub pawls and springs and push and turn (anticlockwise) the freehub back in to the hub shell. Refit your drive side end cap.