TrolMaster Hydro-X CO2 Device Station (DSC-2)

The TrolMaster DSC-2 CO2 Device Station is specially designed for the control of CO2 devices in the Hydro-X Control System. This CO2 control relay allows you to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls directly to the Hydro-X. Any CO2 device that draws 10 amps at 100–240 volts or less can be controlled by the DSC-2.Used in combination with the MBS-S8 CO2 Sensor, the DSC-2 enables fully automated, closed-loop CO2 management — maintaining optimal CO2 levels throughout your grow cycle without manual intervention.Key Benefits CO2 device control — connects and controls supplemental CO2 equipment via the Hydro-X 100–240V compatibility — supports devices up to 10 amps across all world voltage standards Closed-loop CO2 automation — use with MBS-S8 CO2 Sensor for fully automated CO2 management LED Power Indicator — clear visual confirmation of operation status Plug & Play — simple RJ12 connection, no complex wiring required Addressing — easily assigned to your Hydro-X controller Instructions for Use Connect the DSC-2 to your Hydro-X controller using the RJ12 cable. Plug your CO2 device into the DSC-2's 3-prong output socket. Power on the Hydro-X and confirm device recognition. Ensure the MBS-S8 CO2 Sensor is connected for closed-loop CO2 control. Set your desired CO2 setpoints within the Hydro-X interface. Monitor the LED indicator to verify correct operation. Features LED Power Indicator 3-Prong Attaching Plug RJ12 Cable Socket Addressing Plug & Play Specifications Input Voltage: 100–240 VAC, 50/60Hz Output Current: 10A Output Voltage: 100–240 VAC, 50/60Hz Working Environment: Temperature 32–122°F, Humidity ≤90% Package Dimensions: 85mm (L) x 80mm (W) x 90mm (H) Weight: 0.34kg