Shell Helix Ultra ECT C2/C3 0W-30 - 4L

Shell Helix Ultra ECT C2/C3 0W-30 Fully synthetic motor oil - Shell's ultimate protection for vehicle emission systems Shell Helix Ultra ECT C2/C3 features its most advanced emissions-compatible technology that helps to keep diesel particulate filters clean to help maintain engine performance. It helps to reduce engine friction to provide enhanced fuel economy. Performance, Features & Benefits Shell’s most advanced emissions-compatible technology for low-SAPS oil: Protects emission system by helping to keep diesel particulate filters clean. Shell’s ultimate active cleansing technology: Helps to protect high-performance engines from power and performance-robbing deposits. Unsurpassed sludge protection: No other motor oil can keep your engine closer to factory clean. Superior wear protection: Up to 4x better than API SN specification. Up to 50% better than ACEA C2/C3 requirements. Developed with special antioxidants: Helps to provide excellent oxidation protection throughout the oil-drain interval. Low viscosity and low friction: Up to 2.6% greater fuel economy. Superior piston cleanliness: Up to 45% cleaner than ACEA C2/C3 requirements. Exceeds the requirements of API SN specification. Superior corrosion protection: Up to 3x better corrosion protection than required by API SN. Superior intake valve cleanliness: Exceeds the requirements for VW based on VW FSI test. Exceptional low-temperature performance: Faster oil flow for quicker engine warm-up. High resistance to mechanical stress: Maintains viscosity and stays in grade throughout the oil-change interval. Low evaporation formulation: Low oil consumption for less frequent top-up. Main Applications Shell Helix Ultra ECT C2/C3's fully synthetic formulation uses Shell’s most advanced emissions-compatible technology to help gasoline engine exhaust catalysts and keep diesel particulate filters clean and protect them from ash build-up that can block the exhaust system and lead to reduced engine performance. Shell Helix Ultra ECT C2/C3 can be used for modern gasoline engines, diesel engines with particulate filters, and gas engines. Shell Helix Ultra ECT C2/C3 0W-30 is suitable for use in vehicles currently using SAE 5W-30 or 10W-30 grades, providing enhanced engine protection and fuel economy. Specifications, Approvals & Recommendations ACEA C2, C3 API SN VW Standard 504.00, 507.00 MB-Approval 229.52, 229.51, 229.31 Fiat 9.55535-GS1 - Meets the requirements, 9.55535-DS1* - Meets the requirements Porsche C30 Typical Physical Characteristics These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in these characteristics may occur. Kinematic Viscosity @100°C: 11.90 cSt Kinematic Viscosity @40°C: 58.70 cSt Viscosity Index: 204 MRV @-40°C: 18,900 cP Density @15°C: 838.0 kg/m³ Flash Point: 226°C Pour Point: -51°C Technical Data Sheet If you would like to return your order, it must be unused and in the same condition as it was delivered to you. If this is the case, please call our customer service team on +201096040050 or contact us to arrange the details.