AQUILA PRO AI Wi‑Fi 6 Mesh System - Multi Pack Residential Wifi Expansion, Starlink Compatible

Upgrade your Starlink Wifi with D-Link Aquila Pro Mesh System, providing coverage of up to 465m2 with this multi-node setup The D-Link AQUILA PRO AI Multi Pack Systems, are a complete Wi‑Fi 6 Mesh System that provide expanded wireless coverage for Starlink installations where the standard Starlink router signal is insufficient for larger homes, sheds, workshops, granny flats, or multi-room environments. Supports up to 650sqm area with the 3-node mesh system pack. Why we like it? Its designed for simple deployment, the system allows customers to extend network coverage (without relying solely on Starlink mesh nodes) simply by plugging into your Starlink Router. The range of these devices also far exceed that of the Starlink Router Mini mesh nodoes. (see below for larger explanation). The easiest (but not the only) setup method is a direct RJ45/Ethernet connection from the Starlink router (spare RJ45 port) to the primary D-Link AQUILA PRO AI unit for maximum stability and performance. From there, each subsequent Aquila Mesh node can be wirelessly paired for whole of house WIFI extension. (One RJ45 cable is included). Additional can be purchased here. 💡TIP : If you are using a Gen 2 Router, then you will need the Gen 2 Ethernet Adapter to use this mesh system. The multi-node configuration creates a unified Wi‑Fi network with automatic roaming between mesh points. Wi‑Fi 6 technology improves device handling, streaming stability, and coverage efficiency across multiple connected devices. Note: As this is not a Starlink device, you will not be able to see the D-Link mesh system in your Starlink App, however the D-Link Aquila app can be used for additional performance monitoring (if required). ✅ D-Link provides 3-Years warranty on all D-Link devices and 24/7 Technical Support in Australia & NZ on 1300 700 100 (AU) & 0800 900 900 (NZ) Key Features ✅ Expanded Wi‑Fi Coverage — Extends wireless coverage beyond the standard Starlink router range for larger homes and outbuildings. ✅ Simple Ethernet Integration — Connects directly to the Starlink Ethernet port for straightforward installation and improved reliability. ✅ Wi‑Fi 6 Performance — Supports faster wireless speeds, improved efficiency, and better device handling compared to older Wi‑Fi standards. ✅ Seamless Mesh Roaming — Devices automatically switch between mesh nodes without requiring manual reconnection. ✅ Dual-Pack, Three-Pack Mesh Configuration — Includes two or three mesh units for broader coverage across multiple rooms or levels. ✅ AI-Assisted Network Optimisation — Built-in optimisation features automatically adjust network behaviour based on usage conditions. ✅ Supports Starlink Router Expansion — Suitable for use alongside Starlink Gen 3 and Starlink Mini installations where additional wireless coverage is required. Alternative Wireless Setup If Ethernet cabling is not practical, the mesh system can also operate using wireless backhaul between nodes. Wired Ethernet connections will generally provide the highest stability and performance. Real-World Coverage Comparison vs Starlink Mesh The Starlink Router Mini is designed as a compact mesh extender. Official and third-party sources place its coverage around 120–204 m² depending on wall density and placement. The D-Link AQUILA PRO AI M30 uses larger antennas and a higher-powered AX3000 platform. D-Link states the 3-pack system can cover up to 7200 sq ft (~650 m²), with the 2-pack system commonly covering around 465 m² in real-world deployments which is a significant improvement on the standard Starlink Router. Important Notes ⚠️ A Starlink Ethernet adapter may be required depending on the Starlink hardware version being used. ⚠️ For best mesh performance, avoid placing mesh units inside metal cabinets or behind large appliances. ⚠️ Wireless coverage performance may vary depending on wall materials, building layout, and interference sources. ⚠️ Follow local electrical safety regulations when routing Ethernet cabling.