Shopcorp 2 Pole 63A NO Contactor, 120V AC/DC Coil for HVAC & Lighting, DIN Rail | UL Recognized

2 Pole 63A Modular Contactor with 120V AC/DC Coil The Shopcorp BMC7-63U 2 Pole Contactor is designed for compatible HVAC, lighting, automation, control panel, and electrical switching applications requiring a 120V AC/DC control coil. Its compact modular design features two normally open main contacts and supports installation in distribution boxes, HVAC controls, lighting panels, automation systems, and other properly rated electrical equipment. Rated 63A for AC-1 applications and 25A for AC-3 applications, the contactor supports properly matched resistive, slightly inductive, and motor-control loads. Its 250V AC rated working voltage, 120V AC/DC coil, and compact DIN rail format make it a practical option for low-voltage control systems where reliable two-pole switching is required. 120V AC/DC Coil for Control Circuits The contactor operates through A1 and A2 coil terminals using a 120V AC or DC control signal. When the coil is energized, both normally open main contacts close simultaneously, allowing the connected circuit to be switched from a compatible control source. A front status indicator provides a quick visual reference of the contactor operating state. 63A AC-1 and 25A AC-3 Ratings The BMC7-63U is rated for: AC-1: 63A AC-3: 25A Rated working voltage: 250V AC Impulse withstand voltage: 4kV Short-circuit rating: 5kA The 63A AC-1 rating applies to resistive or slightly inductive loads such as properly matched heating and lighting circuits. The 25A AC-3 rating applies to properly matched motor-control applications, including compatible HVAC equipment, fans, pumps, and similar inductive loads. Always select the contactor according to the actual utilization category, operating voltage, load characteristics, and connected equipment requirements. 2 Pole Normally Open Configuration The contactor features two normally open main contacts: 1–2 3–4 Both poles operate together when the 120V coil is energized, making the unit suitable for compatible two-line switching applications. 35 mm DIN Rail Installation The compact modular housing is designed for 35 mm DIN rail mounting, supporting installation inside compatible: HVAC control panels Lighting control panels Distribution boxes Automation cabinets Electrical enclosures Industrial control systems Approximate dimensions are 36 mm wide × 86 mm high × 68 mm deep. UL Recognized Component The BMC7-63U is a UL Recognized Component and is marked for: UL 60947-1 UL 60947-4-1 UL File: E539285 It is intended for integration into properly designed electrical equipment and control systems in accordance with applicable installation requirements and electrical codes.