Stack Block Set

Stack Block (Body Mount Height Adjustment Spacer) Compatible with the diversified modern body mounting methods. This body mount height adjustment block allows you to achieve the best position for any body through its stackable design. By combining the blocks, you can set the height from a minimum of 2mm in 1mm increments, easily accommodating tall bodies or forward-tilted body mounting. Freely adjustable "stacking structure" by simply stacking Achieve your desired height quickly by simply stacking the blocks. The interlocking shape prevents misalignment, providing stable fixation without wobbling even when stacked. Precise "1mm incremental fine adjustment across the entire range" Adjustable from a minimum of 2mm to a maximum of 48mm, in 1mm increments across the entire range. This allows for precise settings to accommodate different body heights, regulations, or aerodynamic requirements. [How to use & Height Reference Chart (Example combinations for 2-20mm)] Always place the "end plate" with a flat top surface at the very bottom, then stack the connecting blocks on top. The table below shows typical combinations; heights of 21mm and above can be set in 1mm increments up to a maximum of 48mm using the same method. *Please provide your own longer screws to match the stacked length. Height Reference Chart (2-20mm - end plate must always be at the very top) Finished Height Combination (End Plate + Connecting Block) Number of Pieces 2 mm End Plate 2 only 1 piece 3 mm End Plate 3 only 1 piece 4 mm End Plate 2 + 2 2 pieces 5 mm End Plate 2 + 3 2 pieces 6 mm End Plate 3 + 3 2 pieces 7 mm End Plate 2 + 5 2 pieces 8 mm End Plate 3 + 5 2 pieces 9 mm End Plate 2 + 2 + 5 3 pieces 10 mm End Plate 2 + 8 2 pieces 11 mm End Plate 2 + 9 2 pieces 12 mm End Plate 2 + 10 2 pieces 13 mm End Plate 3 + 10 2 pieces 14 mm End Plate 2 + 2 + 10 3 pieces 15 mm End Plate 2 + 3 + 10 3 pieces 16 mm End Plate 2 + 5 + 9 3 pieces 17 mm End Plate 2 + 5 + 10 3 pieces 18 mm End Plate 2 + 8 + 8 3 pieces 19 mm End Plate 2 + 8 + 9 3 pieces 20 mm End Plate 2 + 8 + 10 3 pieces [Compatibility] Universal design compatible with horizontal body mounts on various touring cars, etc. [Contents] Contents List (Total 9 pieces × 2) Type Thickness Quantity End Plate (Flat Top Surface) 2 mm 1 piece End Plate (Flat Top Surface) 3 mm 1 piece Connecting Block (Top and Bottom Concave/Convex) 2 mm 1 piece Connecting Block (Top and Bottom Concave/Convex) 3 mm 1 piece Connecting Block (Top and Bottom Concave/Convex) 5 mm 1 piece Connecting Block (Top and Bottom Concave/Convex) 8 mm 2 pieces Connecting Block (Top and Bottom Concave/Convex) 9 mm 1 piece Connecting Block (Top and Bottom Concave/Convex) 10 mm 1 piece Total - 9 pieces × 2 sets (for left and right) [Included] Adjustment block set - 9 pieces × 2 (for left and right) [Note] *If there is interference due to the chassis or body shape, please adjust accordingly. Please provide your own longer screws to match the stacked length. *Bodies, chassis, etc., shown in the photos are not included. *Shapes and specifications may be subject to change without notice for product improvement.