Burkle PP Thread Adapter – S 71×6 (DIN71) to G 2"

Burkle PP Thread Adapter – S 71×6 (DIN71) to G 2" The Burkle 0600-1003 PP Thread Adapter connects components with different container thread standards using S 71×6 (DIN71) internal threading on one side and G 2" internal threading on the other. It is designed for adapting pumps, barrel connections and other liquid-handling components to compatible drums and canisters. This adapter is particularly useful when a container has a 71 mm external thread with a 6 mm pitch (S 71×6 / DIN71) and the equipment or barrel connection uses a G 2" external thread. Important: Thread specifications must match exactly. The 0600-1003 has two internal threads: S 71×6 (DIN71) and G 2". The mating component must therefore have the corresponding external thread. Verify thread type, diameter and pitch before ordering. Key Features S 71×6 (DIN71) internal thread for compatible 71 mm container threads G 2" internal thread for compatible G 2" external connections Polypropylene (PP) construction FKM/FPM fluorine rubber used as an additional material Designed to connect pumps, discharge cocks and other components to containers with different thread standards Useful for drums, canisters and laboratory setups requiring thread conversion Burkle SKU: 0600-1003 Thread Configuration Connection Thread Thread Type Container/component side S 71×6 (DIN71) Internal Equipment/component side G 2" Internal How the 0600-1003 Adapter Is Used The adapter provides a transition between the S 71×6 (DIN71) and G 2" thread standards. Because both threads on the adapter are internal, the components being connected must have the appropriate external threads. Burkle specifically identifies this adapter for applications where a container has an S 71×6 (DIN71) external thread and a component such as a barrel screw connection has a G 2" external thread. This allows the two otherwise different thread standards to be connected through the adapter. Thread Identification and Compatibility Correct thread identification is important when selecting a Burkle thread adapter. Container threads can vary considerably, particularly on plastic drums and canisters. For an S 71×6 thread, the key dimensions are a 71 mm external diameter and 6 mm pitch. Burkle recommends measuring the thread rather than relying solely on the apparent size of the container opening. Before ordering: Confirm the thread standard. Confirm the thread diameter. Confirm the thread pitch where applicable. Confirm whether the mating thread is internal or external. Check material compatibility with the liquid or application. Determine whether an additional seal is required for your particular connection. Technical Specifications Manufacturer Burkle SKU 0600-1003 Product type Thread adapter General material PP (polypropylene) Further material FKM, FPM (fluorine rubber) First connection S 71×6 (DIN71), internal thread Second connection G 2", internal thread Colour Brown Packaging unit 1 piece Typical Applications Connecting pumps to drums and canisters with different thread standards Adapting S 71×6 (DIN71) container threads to G 2" connections Barrel pump and container pump installations Liquid dispensing and transfer equipment Laboratory liquid-handling setups requiring thread conversion Material Compatibility The adapter is primarily constructed from polypropylene, with FKM/FPM fluorine rubber listed as a further material. Chemical compatibility should be evaluated for the specific liquid, concentration, temperature and operating conditions before use. Do not assume compatibility solely from the PP construction. Burkle provides chemical-resistance information to assist with material selection. Frequently Asked Questions What threads does Burkle 0600-1003 have? The 0600-1003 has an S 71×6 (DIN71) internal thread and a G 2" internal thread. What is S 71×6 (DIN71)? S 71×6 (DIN71) is a container thread designation with a nominal 71 mm diameter and 6 mm thread pitch. For this adapter, the S 71×6 thread is internal. What does the G 2" connection mean? G 2" refers to a G/BSP parallel pipe thread. The G 2" thread on the 0600-1003 is internal, so it is intended to mate with a compatible G 2" external thread. What container does the 0600-1003 fit? The adapter is intended for compatible containers with an S 71×6 (DIN71) external thread. The connected equipment must also have a matching G 2" external thread. Always verify the actual thread dimensions before ordering. Is the 0600-1003 a reducer? It is more accurately described as a thread adapter. Its purpose is to connect two different thread standards: S 71×6 (DIN71) and G 2". Need Help Confirming the Correct Thread Adapter? Thread standards can be difficult to identify from container dimensions alone. If you are unsure whether S 71×6 (DIN71), G 2" or another thread standard is required, contact Cambridge Environmental Products before ordering. We can help you identify the appropriate Burkle adapter for your application. Contact Cambridge for Product Support