Pedalboard VTX V2

Hands Custom VTX V2 Modular Pedalboard in Mosaic Teak and Aluminum The Hands Custom VTX V2 is the evolution of our open-frame pedalboard, designed for musicians who want a lighter, organized setup with the freedom to evolve over time. Built from Mosaic Teak Wood and aluminum, the VTX V2 combines handcrafted construction with an aluminum-dominant structure, providing strength without adding unnecessary weight to your rig. Its perforated aluminum surface uses the same hole pattern found on the Supreme V2, with 6 mm and 26 x 20 mm openings that make cable routing, component mounting, and pedal organization easier. The wood features a satin matte varnish finish and is available in Natural Teak and Imbuia. The Imbuia version uses the same Mosaic Teak Wood with a darker stain. Modular 3-Port Patch Bay The main V2 upgrade is integrated directly into the wooden frame. Three configurable connection positions support compatible 1/4" or XLR connectors. The pedalboard ships with blank covers installed, allowing each musician to choose which connections to add — now or later. A separate recessed compartment is also prepared for the optional IEC Power Module and is protected by a black acrylic cover when the module is not installed. Build only the connections your setup actually needs. Without Riser or With Riser Without Riser keeps the entire main surface available for pedal mounting, with an open structure and direct access to cables and components. With Riser adds a fixed second level to the pedalboard, creating additional space for pedals and controllers while providing more room underneath for cable and component organization. The Riser is permanently integrated into the pedalboard and is not removable. Lightweight and Adjustable Depending on the selected size and configuration, the VTX V2 weighs approximately 3.1 to 4.0 lb Without Riser and 4.6 to 5.7 lb With Riser. Four adjustable leveling feet provide approximately 0.4 to 1.8 in of height adjustment, helping improve stability and available clearance underneath the pedalboard. Included in the Box 1 Hands Custom VTX V2 Pedalboard 1 meter of hook and loop tape Nylon cable ties 16 M3 x 10 Allen screws with washers 16 M3 nuts 4 adjustable leveling feet Blank covers for the 3 Patch Bay positions Black acrylic cover for the IEC Power Module compartment The included screws and nuts can also be used to install compatible connectors selected by the musician. Optional Connectivity and Power Available separately: Hands Custom 1/4" pass-through jack XLR connector IEC Power Module 1/4" jacks, XLR connectors, IEC Power Module, and power cable are not included with the standard VTX V2 and are sold separately. The VTX V2 was created for musicians who want less weight, direct access to their setup, and the freedom to configure their pedalboard their own way. Hands Custom VTX V2 — lightweight to carry. Built to configure.