Essential Adhesive Kit - Performance Gen 2 Speedmount

The discs bond down for good. The dish lifts off whenever you want. The TRIO Maritime Flat High Performance Speedmount is a precision-engineered, ultra-low-profile mounting solution designed for the Starlink Flat High Performance / Maritime dish. Built for heavy-duty mobile and marine environments, it protects the edges of the dish, keeps the system stable, and provides a clean, secure install on RVs, vans, boats, trailers, and commercial vehicles. With a height of just 1.85” (1.9” with magnets), the mount delivers a slim aerodynamic profile while preserving full system functionality. The four-piece design slides neatly around the perimeter of the High Performance dish and locks together using stainless-steel screws and nylon locknuts for a strong, rattle-free frame. Here is how this kit works. The VHB Adhesive-Backed Magnet Mounting Discs bond to your roof or deck with 3M industrial-strength adhesive. That bond is permanent, so mark your placement and get it right the first time. The discs turn the surface into a magnetic landing zone. The Rubber-Coated Magnets then sit on top of the discs and hold the mount down. The magnets are the part that comes off. Lift the dish for haul-out, service, storage, or a low bridge, then set it back in seconds with no tools and no adhesive to replace. On bare or painted steel you can skip the discs and set the magnets straight onto the surface. Use the discs for fiberglass, gelcoat, aluminum, composite, and painted surfaces where a magnet has nothing to grab, which covers most decks, hardtops, and RV roofs. For customers looking to reduce overall system draw, pair this mount with our High Performance 12V Conversion Box to lower power consumption by up to 10%. (Sold separately.) Strength: Designed for stationary use, travel days, and marine environments when properly installed. Always allow full VHB cure time on the discs and install behind a wind buffer when possible (AC unit, rack bar, fairing). For high-speed mobile use or fully exposed installs, our Through Bolting 75 mm stainless steel hardware is available separately. Compatible with the Starlink Flat High Performance / Maritime (HP) dish. TRIO-Grade Features: Safety tested at highway speeds No drill Snowmelt protection Heat-transfer optimization Signal performance prioritization What’s Inside the Kit Maritime Flat High Performance Speedmount A strong, low-profile perimeter frame designed for the larger High Performance dish. Four-piece perimeter system that slides and locks around the dish Protects dish edges from impact while keeping a slim profile Marine-grade HDPE components for long-term durability Only 1.85” tall (1.9” with magnets) for minimized wind exposure Ideal for mobile and marine environments Tool-based security with stainless-steel hardware VHB Adhesive-Backed Magnet Mounting Discs Turn a non-magnetic roof or deck into a magnetic mounting point. Powder-coated steel discs backed with industrial-strength 3M VHB adhesive Safe for fiberglass, aluminum, gelcoat, painted metal, and composite surfaces Permanent bond once cured, so confirm your placement before pressing down Weather-resistant and vibration-resistant Creates a stable, low-profile magnetic base for roof or deck installs Rubber-Coated Magnet Set Strong holding force with a surface-safe grip. Holds securely on travel days and in marine environments when properly placed Sits on top of the mounting discs, or straight onto a bare or painted steel surface Rubber-coated to protect gelcoat, paint, and finish Drops on and lifts off in seconds, no tools required Ideal for boats, RVs, vans, trucks, trailers, and commercial vehicles