MoTeC STW195 Steering Wheel

A multi-award winner on debut at PMW Expo and PRI Show, MoTeC’s new Steering Wheel is exceptional in form and function. The STW195 has been meticulously built and tested to FIA specifications, with a robust carbon fiber body and paddles, and an integrated glare-resistant, high-resolution display. The 5" LCD screen layout, along with the built-in LEDs, can be fully customized using MoTeC’s powerful software tools. Each component has been carefully selected with input from professional FIA series drivers to ensure optimum quality, comfort, and ease of operation. Engineered with: 7 x 12 Position rotary dials 6 x Paddles 12 x On / Off buttons 16 x Configurable LEDs FEATURES C125 Display Creator included C125 I/O included Full carbon fiber body Krontec quick release system Impressive high-resolution 125 mm (approx. 5") color LCD display High brightness for sunlight readability Complete customization of screen layouts via included Display Creator 16 full-color (RGB) LEDs; color, function, and intensity are fully programmable FIA marshaling LEDs for sanctioned events Dedicated radio PTT loop button HVIL (High Voltage Interlock) loop Labeling options included Optional internal logging Easily integrates with CAN-based devices GPS Lap Timing Supports T2 Telemetry (with upgrade) UPGRADES 29618 – C125 120MB LOGGING 29620 – C125 PRO ANALYSIS 29623 – C125 T2 TELEMETRY 22140 – DC MATHS TRANSMIT (1 YR) SPECIFICATIONS Display Screen: Color TFT LCD, anti-reflective Resolution: 800 x 480 resolution, anti-aliased graphics 16 x configurable LEDs Layouts: Selectable fixed layouts Fully customizable display layouts with included Display Creator software. 48 user-defined, scrollable message lines with programmable overrides 3 programmable modes with customizable labels Logging - optional (requires upgrades) 120 MB internal logging memory Logging rates up to 500 samples per second Fast Ethernet download i2 Standard data analysis software included (Pro Analysis upgrade available) Inputs / Outputs 12 x On / Off push buttons including 1 x dedicated radio PTT button 7 x 12 Position rotary dials 4 x On / Off paddles 2 x Analogue 0-5V paddles Internal Sensors 3-axis accelerometer, detection range: +/- 5G Dash temperature sensor Sensor supply voltage Battery voltage Communications 2 x CAN buses 1 x Configurable with programmable CAN bus speed. 1 x Reserved 1 x RS232 port with transmit and receive. 1 x Ethernet Programming / Data logging Power supply Operating voltage: 6 to 17 V DC Operating current: 0.8 A typical at 14 V (backlight and all LEDs at 100% brightness) Reverse battery protection Battery transient protection Operating temperature Internal: -20 °C to 70 °C (above 60 °C maximum backlight brightness progressively reduced) Typical ambient temperature range in free air: -10 °C to 55 °C Physical Case Material: Full carbon fiber body Quick release system: Krontec QR-30-22P-LW-V Size: Width < 302 mm Height < 191 mm Weight: 1940 grams, including quick release system 1 x 22-pin Autosport connector Standards UNECE Regulation No. 10 (ECE R10) Sine wave scan according to LV124 Design validation shock according to LV124 Pre-Defined vibration Stress according to LV124 Low Temp Storage according to ISO-16750-4 Low Temp Operating according to ISO-16750-4 High Temp Storage according to ISO-16750-4 High Temp Operating according to ISO-16750-4 Temperature Cycling according to ISO 16750-4 Thermal Shock according to ISO 16750-4 The device is rated to IP65 (Dust and Water) SCREEN CLEANING Wipe using a clean water-dampened microfibre cloth, followed by a clean dry microfibre cloth. SOFTWARE Microsoft Windows-based software Dash Manager is used for setup and management of the display and data logging system, providing: Configuration of the inputs, outputs, LEDs, display, data logging and calculations. Offline generation of a configuration file that can then be sent to the device. Channel monitoring Firmware updating and extensive help screens Display Creator allows for full customization of the screen layout. i2 Data Analysis software provides the tools for comprehensive data analysis. Standard or Pro* version available T2 Telemetry* software (* available via upgrades ) MEASUREMENTS Measurements in mm. IP rating is dependent upon the user ensuring that the connector entries are waterproof, which, at a minimum, requires all unused wire cavitie