Quick Peel DTF Film - 23.6" x 325'

Quick Peel DTF Film - 23.6" x 325' is a 60 cm x 100 m roll-format transfer film for compatible roll-fed DTF production. Its quick-release peel format is intended for workflows where the carrier is removed shortly after heat pressing, subject to the current application instructions for the film, transfer, and garment. Film Type Quick Peel DTF Film Roll Width 23.6" / 60 cm Roll Length 325' / 100 m Format Continuous roll media What Is Quick Peel DTF Film? Quick peel DTF film is transfer media designed for a DTF workflow in which the carrier can be removed relatively soon after heat pressing, according to the specific film's application instructions. This differs from cold-peel film, which requires the transfer to cool before the carrier is removed. The peel method matters because removing the carrier at the wrong stage can affect the finished transfer. Always identify whether the film being used is quick peel, hot peel, warm peel, cold peel, or another release type before production. 23.6-Inch x 325-Foot Roll Format This product is supplied as a 23.6-inch (60 cm) wide by 325-foot (100 m) long roll. The continuous format is intended for compatible roll-fed DTF production equipment. A roll format can support production layouts containing: Individual transfers Repeated logos Front apparel graphics Back graphics Sleeve designs Names and numbers Mixed-size gang sheet layouts Check Your DTF Printer Before Ordering The physical width of a film roll should match the media requirements of the printer and downstream production equipment. Compatibility Checklist Maximum supported roll width Usable printable width Roll-feed configuration Film loading direction Take-up system Powder shaker width Curing equipment width Ink and film compatibility Do not assume that every printer described as a 24-inch machine accepts every 23.6-inch film roll. Confirm the current specifications for the actual equipment. Quick Peel vs. Cold Peel DTF Film The main distinction is when the carrier film is removed after heat pressing. Quick Peel DTF Film A quick-peel workflow allows the carrier to be removed relatively soon after the pressing cycle when the transfer system's instructions permit it. Cold Peel DTF Film A cold-peel workflow requires the transfer to cool before carrier removal. Neither method should be treated as universally better for every production environment. Choose the film according to the transfer system, garment, equipment, and preferred production process. Why Choose Quick Peel DTF Film? The primary workflow advantage of quick-peel film is that it can reduce the waiting stage between pressing and carrier removal when used according to its intended process. This can be useful when a shop is processing repeated garments and wants a pressing workflow that does not require every item to reach a full cold-peel state before carrier removal. Actual production speed still depends on the entire workflow, including printing, powder application, curing, garment loading, heat pressing, peeling, and quality checks. How Quick Peel DTF Film Fits Into Production The film is one component of a complete direct-to-film workflow. Prepare artwork: Confirm transfer dimensions, quantities, and layout. Process the print job: Prepare the artwork through the appropriate RIP workflow. Load the film: Install the roll according to the printer and film instructions. Print the design: Produce the required color and white ink layers. Apply adhesive powder: Add the appropriate hot-melt powder to the printed transfer. Cure the adhesive: Follow the applicable curing process. Heat press: Apply the finished transfer to a compatible garment. Peel: Remove the carrier at the stage specified for the quick-peel film. Finish if required: Complete any post-press step included in the current transfer instructions. Production note: Time, temperature, pressure, curing temperature, peel timing, and post-press requirements can vary by film, ink, powder, garment, and equipment. Use the current instructions for the materials in your actual production setup. Quick Peel Does Not Mean Immediate Peel in Every Setup The term “quick peel” describes the release behavior of the film, but operators should not interpret it as permission to remove the carrier at any arbitrary moment. Peel timing should follow the current instructions for the film and transfer system. If the transfer has not released as expected, stop and verify the production settings rather than forcing the carrier away from the garment. Use Quick Peel Film for Gang Sheet Production A 23.6-inch roll can be used within compatible gang sheet workflows. Multiple graphics can be arranged across the available print area and produced continuously according to job requirements. A gang sheet may include: Multiple copies of one logo Several transfer dimensions Front and back artwork Different customer designs Names or numbers Replacement graphics Actual layout capacity depends on printable width, artwork dimensions, spacing, quantities, and RIP setup. Explore DTF Transfers See ready-to-press transfer options for custom apparel production. Browse DTF Transfers Prepare Artwork Before Printing Film performance cannot correct problems in the original artwork. Review every production file before sending the job to the printer. Artwork Checklist Confirm finished transfer dimensions. Check artwork resolution. Use a transparent background where required. Verify text and spelling. Confirm artwork quantities. Preserve the intended proportions. Check the approved artwork version. Review the final gang sheet layout. Film Loading and Roll Alignment Continuous roll media should be loaded according to the printer manufacturer's instructions. Proper alignment helps the film move through the printing system without unnecessary tracking problems. Before starting a longer print run, check: Roll position Film orientation Feed alignment Media tension Take-up alignment Printable side If the film has a designated printable side, follow the current film instructions rather than assuming orientation from another DTF film product. Powder Application and Curing After printing, the wet ink receives compatible adhesive powder. Excess powder is removed, and the remaining adhesive is cured as part of the transfer-production process. The correct curing conditions depend on the actual powder, ink, film, shaker, oven, and production setup. Avoid using one temperature as a universal setting for all DTF systems. Heat Pressing Quick Peel DTF Transfers Once the transfer has been printed, powdered, and cured, it can be positioned on a compatible garment for heat application. Before pressing: Confirm the garment material. Check the intended transfer location. Keep seams and raised elements away from the pressing area where possible. Verify transfer orientation. Use the recommended time, temperature, and pressure. Confirm the required peel stage. Test Before a Large Production Run When introducing a new film into an existing DTF workflow, run a controlled test before committing a large roll section or full apparel order. Evaluate: Film feeding Ink behavior Powder application Curing result Heat press application Peel timing Transfer appearance Garment response to pressing If one component changes—such as ink, powder, garment, press, or curing equipment—retesting can help confirm the updated workflow. Quick Peel Film for Repeated Apparel Orders A standardized film and pressing workflow can make repeat production easier to document. Once a tested combination has been approved, save the relevant settings with the order information. Production Record Film type Film roll width Ink system Adhesive powder Curing setup Garment style and fabric Press temperature Press time Pressure setting Peel timing Post-press procedure Store DTF Film Carefully Keep unused film protected from conditions that could affect the media before printing. Follow the manufacturer's current storage instructions for the specific roll. Good production handling includes: Keeping the roll clean Protecting the printable surface Avoiding unnecessary fingerprints Keeping the film away from contamination Following recommended temperature and humidity conditions Protecting unused media between production runs Quick Peel Film Is One Part of the DTF System Finished transfer quality depends on more than film alone. The printer, artwork, ink, powder, curing equipment, heat press, garment, operator settings, and maintenance condition all contribute to the final result. If a production problem appears, evaluate the complete workflow rather than automatically assuming the film is the only variable. Explore DTF Supplies for additional components used in direct-to-film production. Quick Peel DTF Film vs. Pre-Made DTF Transfers Quick peel film is a production consumable for businesses printing their own transfers. Ready-to-press DTF transfers are already produced and prepared for garment application. Quick Peel DTF Film: For in-house transfer printing and production. Ready-to-Press Transfers: For businesses that want prepared graphics without operating the full printing workflow. If you do not operate a DTF printer, browse DTF Transfers instead. Frequently Asked Questions About Quick Peel DTF Film What is Quick Peel DTF Film? Quick peel DTF film is transfer media designed so the carrier can be removed relatively soon after heat pressing when used according to the film's specified application process. What size is this Quick Peel DTF Film roll? The roll is listed at 23.6 inches (60 cm) wide and 325 feet (100 m) long. Is Quick Peel DTF Film the same as cold peel film? No. Cold peel film requires cooling before carrier removal, while quick-peel film is designed for an earlier release stage according to its application instructions. Can I use this film with a desktop DTF printer? This is a 23.6-inch-wide continuous roll. Confirm the maximum roll width, feed system, roll diameter requirements, and media specifications of your printer before ordering. How quickly should Quick Peel DTF Film be peeled? Use the current peel instructions supplied for the film and transfer system. Do not assume one fixed waiting time applies to every ink, powder, garment, and press combination. What temperature should I use with Quick Peel DTF Film? Use the application settings specified for the actual film, transfer, and garment combination. Printing, curing, and garment pressing are separate stages and may require different settings. Can Quick Peel DTF Film be used for gang sheets? Yes, it can be incorporated into compatible roll-fed gang sheet production. The number of transfers depends on usable print width, artwork dimensions, spacing, and layout. Do I still need DTF powder with Quick Peel Film? Quick peel describes the carrier-release workflow rather than eliminating other DTF production stages. Use the ink, adhesive, and curing process specified for the complete transfer system. Choose Quick Peel DTF Film for Your Production Workflow Quick Peel DTF Film - 23.6" x 325' provides a 60 cm x 100 m continuous-roll option for compatible DTF production systems. Before ordering, confirm printer width, roll handling, ink and powder compatibility, curing workflow, heat-press settings, and the required peel process. Browse DTF Supplies, explore DTF Transfers, or visit DTF Print Depot for additional production options.