Racers Edge Battery Adapter – Female XT60 to 5mm Bullets, 150mm Pre-Wired Lead for RC Batteries & ESCs

Overview The Racers Edge Female XT60 to 5mm Bullet adapter lets you run a battery pack fitted with an XT60 plug on electronics wired for 5mm bullet connectors, with no soldering and no permanent changes to either side. It comes pre-wired on a 150mm lead, which is long enough to route neatly through a chassis without the adapter body sitting right on top of the ESC or battery tray. Keep one in the pit box and mismatched connectors stop being a reason to sit out a run. Key Features Female XT60 input to 5mm bullet output 150mm pre-wired lead No soldering or rewiring required Reversible - unplug it and both sides are back to standard Performance Benefits Lets one battery collection serve vehicles with different connector standards Avoids cutting and re-soldering factory ESC and battery leads 150mm of wire allows tidy routing instead of a tight, strained joint Bullet connectors give a large contact area for high-current use Usage Notes Check polarity before the first connection Push both ends fully home so the contacts seat completely Insulate or cap bare bullets when the adapter is not in use Keep total wire length as short as practical for best voltage delivery Technical Specs Brand: Racers Edge Item No.: RCE1695 Input: Female XT60 Output: 5mm bullet connectors Wire Length: 150mm What's Included (1) Female XT60 to 5mm bullet adapter lead, 150mm Fitment Compatible RC vehicles: Universal - any RC vehicle, ESC or charge lead using an XT60 battery plug with 5mm bullet connectors on the other side. Summary Bridges XT60 batteries to 5mm bullet electronics instantly Pre-wired 150mm lead, no soldering Fully reversible, so nothing is modified permanently An inexpensive fix for a very common connector mismatch