EDATEC 10.1" Industrial HMI Based on Raspberry CM 4 ED-HMI2020-101C

This listing is for the ED-HMI2020-101C-1216: 10.1-inch industrial HMI based on the Raspberry Pi Compute Module 4 (CM4), with 1GB RAM, 16GB eMMC,1280x800 10-point capacitive touch, HDMI, Gigabit Ethernet, built-in speaker, and optional 8MP front camera. Contact us if you need a specific RAM, storage, wireless, or camera configuration. The ED-HMI2020-101C is a 10.1-inch industrial Human-Machine Interface (HMI) built on the Raspberry Pi Compute Module 4 (CM4), powered by the Broadcom BCM2711 quad-core Arm Cortex-A72 processor at 1.5GHz. Featuring a bright 1280x800 TFT display with a 10-point capacitive touch screen, HDMI 2.0 output, Gigabit Ethernet, dual-band Wi-Fi, Bluetooth, a built-in speaker, and an optional 8-megapixel front camera, it delivers a versatile HMI platform for machine operator panels, smart building controls, kiosks, and a wide range of embedded industrial display applications. Housed in a high-quality metal fanless enclosure, it supports embedded front installation and VESA standard bracket installation, with a wide 9V-28V DC input and a -25°C to 60°C operating temperature range. Key Features Display: 10.1" TFT, 1280x800 resolution, 400 cd/m² brightness, 1000:1 contrast ratio, 30ms response time, LED backlight, MTBF >30,000h Touch Screen: 10-point capacitive touch, 6H surface hardness, ≥85% transmittance, I2C interface, Linux driver support Viewing Angle (CR≥10): 80° Left / 80° Right / 80° Up / 80° Down Processor: Broadcom BCM2711, quad-core Arm Cortex-A72 (ARMv8) 64-bit @ 1.5GHz Memory: 1GB, 2GB, 4GB, or 8GB LPDDR4-3200 SDRAM Storage: 8GB, 16GB, or 32GB eMMC; Micro SD card slot (user storage expansion) HDMI: 1x HDMI Type-A, HDMI 2.0, 4K @ 60Hz Networking: 1x Gigabit Ethernet (10/100/1000M, RJ45) USB: 2x USB 3.0 (5Gbps) + 1x USB 2.0 (480Mbps) Audio: 1x 3.5mm Audio In/Stereo Out jack; built-in 4Ω 3W speaker Camera (Optional): Built-in 8-megapixel front camera Wireless (Optional): 2.4GHz & 5GHz dual-band Wi-Fi (802.11 a/b/g/n/ac) + Bluetooth Expansion: 40-pin GPIO header Reliability: RTC with CR1220 battery backup, EEPROM (4K), crypto authentication, buzzer, reset button, PWR & ACT LED indicators Power: 9V-28V DC via DC jack (5.5x2.5mm), with reverse polarity, overvoltage & overcurrent protection Enclosure: High-quality metal case, fanless design Installation: Embedded front installation, compatible with VESA standard bracket installation OS Support: Raspberry Pi OS (Desktop/Lite, 32-bit & 64-bit) SKU Configuration Guide The ED-HMI2020-101C ordering code breaks down as follows. This table is provided for reference when discussing other configurations with us. Field Options Model HMI2020-101C RAM 02 = 2GB | 04 = 4GB | 08 = 8GB | 12 = 1GB eMMC 08 = 8GB | 16 = 16GB | 32 = 32GB Available standard configurations include HMI2020-101C-0232, -0416, -0832, -1208, -1232, -1408, -1416, -1432, -1808, and -1832. Contact us to confirm availability of a specific RAM/eMMC combination. Specifications System Category Details CPU Broadcom BCM2711, quad-core Arm Cortex-A72 (ARMv8) 64-bit @ 1.5GHz VPU H.265 (HEVC) up to 4Kp60 decode; H.264 up to 1080p60 decode / 1080p30 encode GPU OpenGL ES 3.1 & Vulkan 1.0 Memory 1GB / 2GB / 4GB / 8GB LPDDR4-3200 SDRAM Storage 8GB / 16GB / 32GB eMMC; Micro SD card slot (user storage expansion) Wi-Fi Dual-band 802.11 a/b/g/n/ac (2.4GHz & 5GHz), optional Bluetooth 2402MHz ~ 2480MHz frequency range, optional Operating System Raspberry Pi OS (Desktop/Lite, 32-bit & 64-bit) Display Category Details Panel Type 10.1" TFT LCD Resolution 1280 x 800 Color Depth 16.7M colors Active Area 216.576mm (H) x 135.36mm (V) Backlight LED MTBF >30,000h Luminance 400 cd/m² Contrast Ratio 1000:1 Response Time 30ms Viewing Angle (CR≥10) 80° (L) / 80° (R) / 80° (U) / 80° (D) Touch Screen Category Details Type Multi-point Capacitive Touch Screen Multi-Touch Points Up to 10 points Controller Interface I2C Connection Method COF Transmittance ≥85% Surface Hardness 6H Driver Support Linux I/O & Connectivity Category Details HDMI 1x HDMI Type-A, HDMI 2.0, 4K @ 60Hz Ethernet 1x 10/100/1000M adaptive Gigabit Ethernet, RJ45 USB 3.0 2x USB 3.0, Type-A (up to 5Gbps each) USB 2.0 1x USB 2.0, Type-A (up to 480Mbps) Audio 1x 3.5mm Audio In/Stereo Out jack (MIC IN / Audio OUT, switches to headphone when connected); built-in 4Ω 3W speaker Camera (Optional) Built-in 8-megapixel front camera Antenna (Optional) 1x SMA port for Wi-Fi/BT antenna SD Card 1x Micro SD card slot (user data storage) GPIO 40-pin GPIO header (expansion) Power 1x DC IN, DC jack connector (5.5x2.5mm), 9V-28V input Buttons, Indicators & Expansion Category Details Reset Button 1x Reset button (resets the device) Programming Button 1x PROGRAMMING button (used to flash the eMMC) Power Indicator 1x red PWR LED (power-on/off status) System Indicator 1x green ACT LED (system working status) EEPROM 4K byte onboard storage Crypto Authentication Onboard hardware security element RTC RTC with CR1220 battery backup (keeps system clock through power-off) Buzzer Configurable for alerts and alarms Mechanical & Environmental Category Details Input Voltage 9V-28V DC (DC jack, 5.5x2.5mm) Power Consumption 20W (max) Enclosure High-quality metal case, fanless design Dimensions 258 x 172 x 40mm (W x D x H, antenna not included) Weight About 1.1kg Installation Embedded front installation; VESA standard bracket compatible Operating Temperature -25°C to 60°C Storage Temperature -25°C to 60°C Humidity 5% ~ 95% (non-condensing) Certifications FCC (47 CFR Part 15 Subpart B); CE (EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-17 V3.2.6 (draft), EN 55032:2015 + A1:2020 + A11:2020, EN 55035:2017 + A11:2020, EN IEC 61000-3-2:2019 + A1:2021, EN 61000-3-3:2013 + A1:2019 + A2:2021, ETSI EN 300 328 V2.2.2, ETSI EN 301 893 V2.1.1) Optional Accessories HMI Mounting Kit (required for embedded front installation -- sold separately): Model Description ED-ACCHMI-Front HMI Mounting Kit for front installation -- includes 4x buckles, 4x M4×10 screws, 4x M4×16 screws Note: The standard package does not include the mounting kit. Purchase separately if embedded front installation is required. Passive Cooler: Model Description ED-CM4Cooler Passive Cooler for Raspberry Pi Compute Module 4 (CM4) What's in the Box 1x ED-HMI2020-101C Unit 1x HMI Mounting Kit Note: The HMI Mounting Kit for embedded front installation is not included in the standard package and must be purchased separately (ED-ACCHMI-Front). Technical Documents Datasheet User Manual HDMI is a trademark or registered trademark of HDMI Licensing Administrator, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Wi-Fi is a registered trademark of Wi-Fi Alliance. MCCI and MCCI Catena are registered trademarks of MCCI Corporation. All other trademarks are the property of their respective owners.