Goodman 3.5 Ton 15.2 SEER2 R-32 High-Efficiency Heat Pump System | GLZS5BA4210 + AMST Air Handler

Goodman 3.5 Ton 15.2 SEER2 R-32 High-Efficiency Heat Pump System | GLZS5BA4210 + AMST Air Handler

Brand: Goodman
SKU: GLZS5BA4210-AMST42CU1300
5876.00 USD In stock Buy at Merchant

An AHRI-matched Goodman GLZS5 high-efficiency heat pump system: the GLZS5BA4210 3.5 ton R-32 outdoor heat pump paired with a Goodman AMST multi-position air handler. The GLZS5 is Goodman's higher-heating-efficiency single-stage line, rated up to 8.2 HSPF2, so it is a good fit where the heat pump carries most of the winter heating. Choose your optional HKTSN heat kit above; the price updates with your selection. What's included 1 × Goodman GLZS5BA4210 3.5 Ton R-32 split heat pump (outdoor unit) 1 × Goodman AMST multi-position air handler (AMST42CU1300), 9-speed ECM blower, factory-installed TXV 1 × Goodman HKTSN electric heat kit, if selected Not included: line set, thermostat, condenser pad, disconnect, or installation. These are available in the accessories section below. Air handler match (AHRI matched) Air handler Cabinet width System rating AHRI certificate AMST42CU1300 21" 15.2 SEER2 215381163 Heat kit options A field-installed HKTSN electric heat kit provides supplemental and emergency heat. Available with this system: 5 kW (HKTSN05X1), 8 kW (HKTSN08X1), 10 kW (HKTSN10X1). Size the kit to the home's heat loss, and confirm kit and breaker sizing against the air handler installation manual and local code. Specifications Outdoor unit Goodman GLZS5BA4210 split heat pump, single stage Nominal capacity 3.5 Ton (42,000 BTU/h) Cooling efficiency 15.2 SEER2 (see AHRI table) Heating efficiency Up to 8.2 HSPF2 (outdoor unit rating; system rating varies by match) Refrigerant R-32 Air handler type AMST multi-position (upflow, horizontal left/right; downflow with kit) Blower 9-speed ECM Electrical 208/230V, 1 phase, 60 Hz Typical coverage About 1,750–2,100 sq ft (rough guide only; size with a Manual J load calculation) Warranty 10-year limited parts with online registration Installation notes R-32 is an A2L refrigerant. Install to current codes and the manufacturer's instructions, including any refrigerant detection requirements. Installation by a licensed HVAC contractor is required to keep the manufacturer warranty valid. Ships by freight with liftgate delivery. Inspect both units for damage before signing. Downflow installation requires a separately purchased Goodman downflow kit. FAQ GLZS5 or GLZS4?Both are single-stage R-32 heat pumps. The GLZS5 has a higher heating efficiency rating (HSPF2), which saves more in climates with real winters. In mild climates, the GLZS4 usually makes more sense. Do I need a heat kit? Most heat pump installs include one for backup and defrost heat. Size it to the home's heat loss: smaller kits suit mild climates, larger kits colder ones. Can I reuse my existing line set? Sometimes. Size and condition must suit R-32 and this system's specs. Your installer should verify the line set and flush it if it's being reused. Is this compatible with my old R-410A or R-22 equipment? No. Replace both the outdoor unit and the indoor unit together with this matched R-32 system.

Specifications
Air Handler
AMST42CU1300 (21" cabinet)
Heat Kit
None, 5 kW (HKTSN05X1), 8 kW (HKTSN08X1), 10 kW (HKTSN10X1)
Variants (4)
  • AMST42CU1300 (21" cabinet) / None — 5876.00 USD — In stock
  • AMST42CU1300 (21" cabinet) / 5 kW (HKTSN05X1) — 5987.00 USD — In stock
  • AMST42CU1300 (21" cabinet) / 8 kW (HKTSN08X1) — 6014.00 USD — In stock
  • AMST42CU1300 (21" cabinet) / 10 kW (HKTSN10X1) — 6025.00 USD — In stock

How AI sees this product

The more complete this product's details, the more confidently AI assistants can understand and recommend it.

86%