36" Wall-to-Wall Linear Shower Drain – Wall-Mounted, Three-Side Flange | Drains Unlimited

36 Inch Wall-to-Wall Linear Shower Drain – Wall-Mounted for a Seamless, Gap-Free Tile Floor Wall-Mounted, Wall-to-Wall Three-Side Return Flange | Drains Unlimited DUFR-TF Series | 36" Stud-to-Stud, 33-3/4" Visible Grate No tile strip – installs flush against the back wall and both side walls Stud-secured three-side return flange for 1/8" to 3/8" thick wall tile 14-gauge 304 stainless steel, rust-resistant and electro-passivated Works with major waterproofing systems – Schluter Kerdi, Laticrete Hydroban, Blanke Aqua-Shield and Mapei Is the 36" Drain the Right Size for Your Shower? Choose the 36" size if your shower opening measures 36" between the finish faces of the framing (stud to stud). The visible grate is 33-3/4". Measure the framing, not the finished tile opening. Need a different width? See all sizes in our wall-mounted linear shower drains collection. Create a seamless, wall-to-wall shower floor with no visible tile strip at either side or the back wall. Standard linear drains sit a few inches off the wall, leaving a strip of tile that must be custom-cut, bonded, or floated to match the floor. The DUFR-TF eliminates that strip for a cleaner shower design. The DUFR-TF Series 36 inch wall-to-wall linear shower drain is designed for both commercial and residential interior applications, including curbless and ADA-compliant shower builds, luxury shower remodels, wet rooms, spas, hotels, and multi-family renovation projects. Back Wall Return Flange vs Three-Side Flange – Which One Do You Need? The DUFR Series is available in two flange configurations, both for 1/8" to 3/8" thick wall tiles: Three-Side Return Flange – For showers with walls on the back and both sides. The drain spans the full width of the shower and is enclosed on three sides. Back Wall Return Flange Only – Installs against the back wall without return flanges on the ends. Ideal for curbed or curbless showers where the drain has open space at one or both ends. Technical Specifications Material 14-gauge AISI 304 stainless steel, rust-resistant and electro-passivated Drain Length 36" (measured at the outer edge of the flange) Visible Grate Length 33-3/4" Grate Width 2-1/2" with V-shaped bottom Outlet 2-3/8" outside diameter, no-hub coupling installation Flange Three-side return flange for 1/8" to 3/8" thick wall tiles Standards Meets ASME A112.18.2 / CSA B125.2 Performance Single slope to drain, high flow rate performance Shallow V-bottom design for better water flow to the drain outlet Hygienic, gap-free design with no tile strip for mold and grime to collect Removable grate and hair strainer for easy cleaning and maintenance Installation Must be secured to the stud (wall framing) Textured bonding flange for a tight seal with both sheet and liquid waterproofing membranes Suitable substrates: concrete, exterior glue plywood (interior use only), cement backer board, cement mortar bed, pre-sloped foam shower pans What's Included Drain body Grate Hair strainer Puller key Grate Options Available with decorative metal grate options in: Wedge Wire design Square Perforated design Available finishes include: Brushed stainless steel Polished stainless steel Black powder-coated stainless steel Available Sizes 30", 32", 34", 36", 40", 42", 44", 48", 54", 60", 66", 72" (Drains measured at the outer edge of the flange.) Prefer a grate that blends into the floor? See the Tile-In Grate version. Additional standard sizes and custom configurations are available. Frequently Asked Questions 1. Does this drain need to touch both side walls? Yes. If your shower doesn't have walls on both sides, choose the Back Wall Return Flange Only version. The same applies to shower benches: if the bench runs the full width between both side walls, the front of the bench acts as the back wall and this three-side version works. If the bench has open space at either end, choose Back Wall Return Flange Only. Either way, the bench must be framed so the drain can be secured to the studs. 2. My shower is a non-standard size. Can I get a custom linear drain? Yes. If your measurement falls outside the standard sizes, request a custom dimension using the "Request Custom Size" option. Custom configurations are also available, including side outlet, horizontal side outlet, and 316-grade stainless steel options. Contact us for more information. 3. How do I stop mold and gunk from building up behind my shower drain? That buildup usually comes from the narrow tile strip and extra grout lines between a standard linear drain and the wall, where water sits and soap scum collects. This drain installs flush against the walls, so there's no strip and fewer grout joints to trap dirt. The removable grate and included hair strainer make cleaning quick. Explore More Linear Drain Options The DUFB Series standard linear drains are available in multiple sizes, styles, and finishes to match different shower layouts and designs. Shop our full selection of linear floor drains. For a contemporary, upscale shower design, the DUWR Series wall-recessed linear drains offer a more concealed drain installation, making them a strong choice for luxury shower construction. Browse wall-recessed linear drains.