Charm Red PPF | Self-Healing TPU Color Film

Charm Red is a deep, glossy red with real warmth to it. In direct sun it reads bright and lively, and as the light drops it pulls into a richer, deeper tone. It gives flat factory paint the kind of color and depth that turns heads in a parking lot, without the plastic look you get from cheap film.The difference here is that the color is doing two jobs at once. This is paint protection film, not vinyl, so the same layer that gives you the red also takes the hits. Rock chips, road grime, light scratches, bug splatter and wash swirls land on the film instead of your factory paint. You get the new color you want and the original paint stays sealed and safe underneath. Key features Self-healing topcoat: minor scratches and swirl marks fade out with heat from the sun or a heat gun. Hydrophobic surface: water and dirt bead off instead of sticking, so the film stays cleaner for longer. Acid rain and oxidation resistant: holds up against acid rain, oxidation and yellowing over years of daily driving. Stain and penetration resistant: bird droppings, tree sap and grease do not soak into the film. Flexible and tear resistant: high elongation and tensile strength let it stretch over curves without cracking. Mirror-gloss finish: the glass-crystal top layer boosts paint depth and gloss by up to 40 percent and smooths out orange peel. Removable adhesive: peels off cleanly with heat, with no glue residue left behind. Bubble-free install: designed to lay flat without bubbling, warping or lifting at the edges. The Wrapteck 3-layer TPU structure Specifications Material TPU (thermoplastic polyurethane) Thickness 7.5mil (330 ± 10µm) Structure 3 layers Raw material Lubrizol TPU resin Adhesive Ashland acrylic adhesive Topcoat Cashew-based coating Application Wet install Roll width 1.52m (5ft) Roll lengths 3m, 6m, 9m and 15m Warranty 8 years Lab test report Test Result Method Thickness 330 ± 10µm Mitutoyo thickness meter Elongation at break 100N ASTM D624-2000 Puncture resistance >15N GB/T 10004 Tensile strength 25MPa ASTM D638-2014 Finished film elongation >300% ASTM D882 Max operating temperature 100°C to 120°C GB/T 7141-2008 Anti-yellowing B value <5 GB/T 16422.3-2014, QUV 5000 hours Adhesive hold strength >2200g GB/T 4851 UV resistance 95% to 98% blocked GB/T 2680 Gloss level 95GU 3NH gloss meter, 60 degree New to wrapping? If this is your first film, start with our guide on how to wrap a car. This is a wet-install film, so you can do panels and accents at home, and a professional installer is the safest route for a full-car wrap.