Polywater® AirRepair® Air Leak Repair System, Asset Maintenance Solutions

Application Gun - Tool-50-11 Description A safe and convenient air leak sealant that helps extend the life of pressurized cable infrastructure. Polywater® AirRepair® is a safe, fast, and effective air leak repair system that eliminates the need for messy and dangerous molten lead “hot wipe” repair of pressurized telephone cables and splices. It is a two-part, rapid-cure, resin air leak sealant system that stops air leaks in lead-sheathed cables and splice enclosures, polyethylene cable jackets, load coils, and end-plates. The cured resin of this pressurized cable leak repair system maintains a high level of adhesion and structural integrity to ensure a long-lasting, quality repair. Polywater® AirRepair® Air Leak Repair System | PRESSURIZED LEAK REPAIR SYSTEM Seals air leaks in lead-sheathed cables, splice enclosures, and polyethylene cable jackets Eliminates hot lead wiping for improved safety and convenience Withstands environmental extremes with a permanent, long-lasting seal Features Features SAFE Eliminates hot lead wiping for improved safety and convenience MULTIPLE USES Seals air leaks in lead-sheathed cables, splice enclosures, polyethylene cable jackets, load coils, end-plates, and more FAST CURE Ready for pressurization within 15 minutes DURABLE Withstands environmental extremes with a permanent, long-lasting seal EASY Dripless material is simple to apply in hard-to-reach areas ECONOMIC Faster than hot lead wiping, a single craftsperson only needs minimal training Product Notes One air leak repair kit contains enough material to seal a leak of approximately 6-square inches (39-cm²). Chemically resistant to contaminants commonly found in vaults. Vertical Sag: Paste clings to vertical surfaces and other difficult angles common in field repairs. Once applied, it stays in place. Polywater AirRepair Sealant is provided in a kit customized to end-user needs. The pressurized cable leak repair kit contains the preparation and patching materials necessary to repair air leaks in polyethylene and lead-sheathed cables and splice enclosures. Components typically include sealant, putty, cleaning wipes, abrasive cloth, mixing and application tools, gloves, primer (for polyethylene applications), and detailed instructions. Specifications Download Specsheet Download Application Instructions SDS TECHNICAL SPECIFICATIONS COMPONENT PROPERTIES COLOR (PART A RESIN / PART B CURING AGENT) BLACK / WHITE FORM (PART A RESIN / PART B CURING AGENT) THICK PASTE / THICK PASTE VOC CONTENT (PART A / PART B) 0 G/L / 0 G/L SPECIFIC GRAVITY (PART A / PART B) 1.7 / 1.4 CURE RATE 35°F (2°C) WORKING TIME: 40 MINUTES FUNCTIONAL CURE: 7 HOURS 52°F (11°C) WORKING TIME: 20 MINUTES FUNCTIONAL CURE: 3½ HOURS 60°F (16°C) WORKING TIME: 10 MINUTES FUNCTIONAL CURE: 1½ HOURS 70°F (21°C) WORKING TIME: 6 MINUTES FUNCTIONAL CURE: 60 MINUTES 88°F (31°C) WORKING TIME: 4 MINUTES FUNCTIONAL CURE: 40 MINUTES ENVIRONMENTAL RESISTANCE TEMPERATURE RANGE APPLICATION: 40°F TO 120°F (4°C TO 49°C) USAGE: -40°F TO 300°F (-40°C TO 150°C) TEMPERATURE CYCLE TESTING -22°F / 203°F (-30°C / 95°C), 10 CYCLES NO SIGNIFICANT CHANGE IN ADHESION OCCURRED GALVANIZED STEEL 100% (PASS) ALUMINUM 100% (PASS) CERAMIC 100% (PASS) COPPER 100% (PASS) STAINLESS STEEL 100% (PASS) LEAD 100% (PASS) Additional Information Product Flyer PROP 65 STATEMENT WARNING: THIS PRODUCT CAN EXPOSE YOU TO 2-(PHENOXYMETHYL)-OXIRANE WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, AND 4,4’-(1-METHYLETHYLIDENE)BIS-PHENOL WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND/OR OTHER REPRODUCTIVE HARM. FOR MORE INFORMATION, GO TO WWW.P65WARNINGS.CA.GOV. WARNING: THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS INCLUDING SULPHURIC ACID, NITRILOTRIACETIC ACID, WHICH IS/ARE KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER. FOR MORE INFORMATION, GO TO WWW.P65WARNINGS.CA.GOV. What's in the Box What’s in the Box Qty 1 - Polywater® AirRepair® Air Leak Repair System, Asset Maintenance Solutions AIRREPAIR SYSTEM PRODUCT CATALOG AR-KIT Customized AirRepair® kit. Call for details. Units/Case varies ARCT-KIT8 8 – AirRepair® cartridges 4 – static mixers 4 – putty sticks 16 – Type RP™ surface prep wipes 8 – PW-1 primer towelettes 1 – sanding cloth 6 – application sticks 8 – pairs of gloves 1 – instructions 1 AR-KIT97 - 1 AR-KIT99 - 1 TOOL-50-11 1 – dispensing tool for ARCT-KIT8 1 AR-STICK 7-in/18-cm putty stick for temporary leak plugging. 12 PW-1 Plastic primer towelette 10 RP-1 Type RP™ surface prep wipes 96