Geekvape Z Series Replacement Coils

Geekvape Z Coils Geekvape Z Series Replacement Coils feature KA1 Kanthal mesh construction with a push-fit design that eliminates threading, push the coil in, align the tabs, and vape. Available in 4 resistances, 0.15Ω, 0.2Ω, and 0.4Ω XM Boost + 0.25Ω Dual, for DTL sub-ohm vaping between 45W and 85W. Sold in packs of 5 at Vape Connect. Geekvape Z Coils use XM Boost technology in the 0.15Ω, 0.2Ω, and 0.4Ω options for higher heat efficiency and stable vapour release. The XM coils deliver massive clouds, deep flavour, and twice the lifespan of regular coils. Continuous e-liquid feed and burn protection keep vaping sessions consistent from the first puff to the last. Geekvape Z Series Coils are compatible with Aegis Legend 5, Aegis Legend 3, S100, L200, Obelisk 120FC kits and Z Subohm Tank 5, Zeus Z, and Z Fli tanks. Two metal tabs on each coil align with corresponding cutouts in the tank base for secure, tool-free installation. Most compatible tanks include a coil-removal tool for easy swaps. Geekvape Z Replacement Coils are recommended for use with High VG 70+ e-liquids suited to DTL vaping. Lower resistance coils (0.15Ω to 0.2Ω) produce maximum cloud output at higher wattages, and higher resistance options (0.25Ω to 0.4Ω) deliver a balanced draw at moderate wattages. These coils do not fit the Z Max Tank (M-Series) or Z Nano 2 Tank (B-Series). Geekvape Z Series Replacement Coils Features Geekvape Z Series Coils combine KA1 Kanthal mesh construction with XM Boost technology and push-fit installation for powerful DTL sub-ohm vaping. Below are the 8 key features of Geekvape Z Series Replacement Coils: KA1 Kanthal mesh construction heats e-liquid quickly and evenly for improved flavour accuracy and dense vapour production. 4 resistance options, 0.15Ω, 0.2Ω, 0.4Ω XM Boost and 0.25Ω Dual covering 45W to 85W for DTL vaping. XM Boost technology delivers higher heat efficiency, stable vapour release, and twice the lifespan of regular coils. Push-fit installation eliminates threading, align the metal tabs with the tank base cutouts and push in. Continuous e-liquid feed with burn protection prevents dry hits and maintains consistent flavour throughout the coil lifespan. Compatible with 5 kits and 3 tanks including Aegis Legend 5, S100, L200, Z Subohm Tank 5, and Zeus Z. Recommended for High VG 70+ e-liquids suited to sub-ohm DTL vaping with maximum cloud output. Sold in packs of 5 for extended use between purchases. Geekvape Z Series Coil Types and Compatibility Geekvape Z Series Replacement Coils are available in 4 resistances across DTL sub-ohm vaping. Each coil uses KA1 Kanthal mesh construction with specific wattage ranges optimised for its resistance level. Coil Types Coil Resistance Wattage Range Best Wattage Type Z0.15 XM Boost 0.15Ω 70 to 85W 80W XM Mesh Z0.2 XM Boost 0.2Ω 70 to 80W 75W XM Mesh Z0.4 XM Boost 0.4Ω 50 to 60W 55W XM Mesh Z0.25 Dual 0.25Ω 45 to 57W 50W Dual Mesh The XM Boost coils (0.15Ω, 0.2Ω, 0.4Ω) deliver higher heat efficiency, stable vapour release, and twice the lifespan of regular coils. Continuous e-liquid feed and burn protection keep flavour consistent across the entire coil lifespan. The Z0.25 Dual coil uses a dual mesh construction for balanced flavour and vapour production at moderate wattages between 45W and 57W. The dual mesh design heats e-liquid from two surfaces simultaneously, increasing vapour density without requiring higher power output. Compatible Devices Device Type Compatible Coils Geekvape Aegis Legend 5 Kit 0.15Ω, 0.2Ω, 0.25Ω, 0.4Ω Geekvape Aegis Legend 3 Kit 0.15Ω, 0.2Ω, 0.25Ω, 0.4Ω Geekvape S100 Kit 0.15Ω, 0.2Ω, 0.25Ω, 0.4Ω Geekvape L200 Kit 0.15Ω, 0.2Ω, 0.25Ω, 0.4Ω Geekvape Obelisk 120FC Kit 0.15Ω, 0.2Ω, 0.25Ω, 0.4Ω Geekvape Z Subohm Tank 5 Tank 0.15Ω, 0.2Ω, 0.25Ω, 0.4Ω Geekvape Zeus Z Tank 0.15Ω, 0.2Ω, 0.25Ω, 0.4Ω Geekvape Z Fli Tank 0.15Ω, 0.2Ω, 0.25Ω, 0.4Ω Geekvape Z Series Coils do not fit the Z Max Tank (uses M-Series coils) or the Z Nano 2 Tank (uses B-Series coils). Ensure the selected coil resistance matches your device's output range before purchasing. How to Use Geekvape Z Series Replacement Coils Remove the old coil, prime the new Z Series coil with e-liquid, and push-fit it into the tank base. The entire process takes under 2 minutes with no threading or screwing required. Step 1: Remove the Old Coil Detach the tank from your Geekvape device. Use the coil-removal tool included with most compatible tanks to pull the used coil out of the tank base and discard it. Step 2: Prime the New Coil Apply 3 to 5 drops of e-liquid directly onto the exposed cotton ports on the new Z Series coil. Priming saturates the wicking material before first use and prevents dry hits. Step 3: Align and Push-Fit the New Coil Line up the two metal tabs on the coil with the corresponding cutouts in the tank base. Push the coil firmly into the base until it sits securely, no threading or screwing required. Step 4: Reassemble the Tank Reattach the tank base to the glass section and screw the assembly back onto your Geekvape device. Ensure all connections are tight to prevent leaking. Step 5: Fill the Tank Fill the tank with High VG 70+ e-liquid through the top-fill port. Avoid overfilling past the maximum line to prevent flooding and leaking. Step 6: Wait for Full Saturation Allow 5 to 10 minutes for the mesh coil to fully absorb the e-liquid after filling. Skipping the wait period increases the risk of burning the cotton and reduces coil lifespan. Step 7: Start at Low Wattage Begin vaping at the lower end of the recommended wattage range for your coil resistance. Gradually increase wattage to find your preferred balance of flavour and cloud production. What's in the Box? Every Geekvape Z Series Replacement Coils pack contains everything needed to replace your coil immediately with zero additional purchases. 5 x Geekvape Z Series Replacement Coils FAQs About Geekvape Z Series Coils What resistances are available in Geekvape Z Series Coils? Geekvape Z Series Coils are available in 4 resistances, 0.15Ω, 0.2Ω, and 0.4Ω XM Boost plus 0.25Ω Dual. All 4 options are designed for DTL sub-ohm vaping between 45W and 85W. What devices are compatible with Geekvape Z Coils? Geekvape Z Series Coils are compatible with Aegis Legend 5, Aegis Legend 3, S100, L200, Obelisk 120FC kits and Z Subohm Tank 5, Zeus Z, and Z Fli tanks. These coils do not fit the Z Max Tank or Z Nano 2 Tank. What is XM Boost technology in Geekvape Z Coils? XM Boost technology delivers higher heat efficiency and stable vapour release with continuous e-liquid feed and burn protection. XM Boost coils last twice as long as regular coils, available in the 0.15Ω, 0.2Ω, and 0.4Ω resistances. How do I install Geekvape Z Series Coils? Geekvape Z Series Coils use a push-fit design that eliminates threading. Align the two metal tabs on the coil with the corresponding cutouts in the tank base and push firmly until the coil sits securely. Do Geekvape Z Coils fit the Z Max Tank? No, Geekvape Z Series Coils do not fit the Z Max Tank, which uses M-Series coils. The Z Nano 2 Tank uses B-Series coils and is not compatible with Z Series coils either. What e-liquids work best with Geekvape Z Series Coils? Geekvape Z Series Coils are recommended for use with High VG 70+ e-liquids suited to DTL sub-ohm vaping. E-liquids with at least 70% VG deliver optimal flavour and cloud production across all 4 resistances. How long do Geekvape Z Series Coils last? Standard Z Series Coils last between 1 to 3 weeks depending on e-liquid type, wattage settings, and vaping frequency. XM Boost coils (0.15Ω, 0.2Ω, 0.4Ω) last twice as long as regular coils due to higher heat efficiency and burn protection. How many coils come in a pack of Geekvape Z Series Coils? Geekvape Z Series Replacement Coils are sold in packs of 5. Each pack contains 5 coils of the same resistance.