20mm Rubber Playground Tiles | 500mm × 500mm | EN1177 Tested | Recycled Rubber
✓ EN1177 Certified 🚚 Free UK Delivery ★ Schools & Councils 📞 Expert Support: 01744 520110 20mm Rubber Playground Tiles — Built for Safety, Designed to Last Engineered from high-density recycled rubber, these 500mm × 500mm × 20mm playground tiles deliver professional-grade impact protection and all-weather durability for outdoor play surfaces. Tested and compliant with EN1177 impact attenuation standards, they're the go-to choice for schools, nurseries, parks, and garden play areas where safety and longevity are non-negotiable. Product Specifications Dimensions (per tile) 500mm × 500mm × 20mm Coverage (per tile) 0.25 m² Tiles per m² 4 tiles Material High-density recycled rubber Surface Finish Textured, non-slip Colour Options Black, Red, Green Safety Standard EN1177 & EN1176-1 tested Critical Fall Height Suitable for play equipment up to ~0.6m fall height Installation Method Adhesive-fixed (permanent installation) UV Resistance Yes — colour-stable, fade-resistant Weather Resistance Frost-proof, waterproof, year-round outdoor use Origin Made in Europe Choosing the Right Thickness for Your Play Equipment Critical Fall Height (CFH) is the single most important factor when selecting playground tiles. UK and EU standards (EN1177) specify the minimum tile thickness required based on the maximum fall height from your equipment: Tile Thickness Suitable CFH (Max Fall Height) Typical Applications 20mm ← You are here Up to ~0.6m Low-level equipment, sensory trails, toddler play areas, nursery outdoor spaces 30mm Up to ~1.0–1.6m Primary school playgrounds, climbing frames under 1.5m, swings 40mm+ Up to ~2.0m+ Adventure play areas, higher climbing structures, public park equipment Not sure which thickness you need? Measure the height of your tallest equipment's highest accessible surface — that's your critical fall height. For equipment over 0.6m, browse our 30mm and 40mm playground tiles. Step-by-Step Installation Guide Prepare the substrate — Install onto concrete, tarmac, or compacted gravel. The surface must be clean, dry, level and free from loose material. A slight fall (1–2%) for water drainage is ideal. Dry-lay first — Arrange tiles without adhesive to confirm coverage and plan cuts before committing. Apply rubber adhesive — Use a specialist rubber tile adhesive (contact adhesive or polyurethane). Apply to both the tile underside and the substrate for a permanent bond. Press firmly and allow to set — Press each tile down firmly for full contact. Leave to cure per adhesive manufacturer instructions (typically 24–48 hours) before allowing use. Cutting to size — Tiles cut cleanly with a sharp Stanley knife and straight edge. Mark, score deeply, then snap — or use a jigsaw for curved cuts. Perimeter edges — For a clean professional finish, leave a small expansion gap (3–5mm) at fixed boundaries such as walls and fences. Where These Tiles Are Used Schools & Nurseries — Compliant safety surfacing for EYFS outdoor spaces and primary playground sensory zones Garden Play Areas — A permanent, low-maintenance surface under home climbing frames and swing sets Public Parks & Community Spaces — Durable enough for high footfall, weatherproof for year-round exposure Sensory & Nature Trails — Colour options allow creative zone marking and wayfinding paths Early Years Settings — Soft underfoot, shock-absorbent surface ideal for toddler and reception-age play Coverage Calculator Working out how many tiles you need is simple: Each tile covers 0.25 m² (500mm × 500mm) You need 4 tiles per m² Formula: Area in m² × 4 = number of tiles Example: A 3m × 4m play area = 12 m² = 48 tiles. We recommend ordering 5–10% extra to allow for cuts and future replacements. Why Recycled Rubber? These tiles are manufactured from granulated recycled rubber — a proven material that delivers outstanding performance in playground environments. Unlike loose-fill surfacing (wood chip, sand, rubber crumb), solid rubber tiles stay in place, require no topping up, and leave no loose material that children can scatter or ingest. The dense rubber construction also means excellent drainage — water passes through quickly, keeping the surface safe and usable even after heavy rain. EN1177 & EN1176 Compliance — Explained EN1177 (Impact-Attenuating Playground Surfacing) is the European standard that defines the minimum shock-absorption performance required for playground flooring. Any surfacing installed beneath playground equipment must meet EN1177 for the relevant critical fall height. EN1176 (Playground Equipment and Surfacing) is the complementary standard covering the equipment itself. Together, EN1176 and EN1177 form the complete safety framework for compliant playground installations in UK schools, nurseries, and public spaces. These tiles are tested to both standards, giving you the documentation you need for school audits, local authority inspections, and insurance requirements. Frequently Asked Questions Q: Are these tiles suitable for outdoor use in the UK climate? A: Fully. The recycled rubber construction is waterproof, UV-stable, and frost-proof — designed specifically for permanent outdoor installation in all weather conditions. Q: Do I need planning permission or a contractor to install these? A: Not typically. These are a DIY-friendly product for most garden and small commercial installations. For large public spaces or LA-owned parks, we recommend engaging a qualified installer who can provide installation certification. Q: Can I mix colours in one order? A: Yes — simply add the quantities of each colour you need to your cart separately. Tiles across colours are identical in dimension, so they butt up perfectly. Q: How do I clean and maintain the surface? A: Brush off debris regularly. Hose down with clean water as needed. For stubborn marks, mild soapy water works well. The surface requires no specialist maintenance. Q: What adhesive should I use? A: A contact adhesive or polyurethane rubber tile adhesive is recommended. Available from builders merchants — ask for a product rated for rubber-to-concrete or rubber-to-tarmac bonding. Q: Is 20mm thick enough for my playground? A: 20mm is appropriate for low-level play equipment with a maximum fall height of approximately 0.6m. For taller equipment, see our 30mm tiles. If unsure, measure the highest accessible point of your equipment — that is your critical fall height. Q: What if I need to remove a tile later? A: Adhesive-fixed tiles are intended as a permanent installation. Tiles can be removed with effort using a floor scraper, but adhesive residue will need to be cleaned from the substrate before relaying. Q: Can these tiles be used indoors? A: Yes — they perform equally well in indoor soft play areas, nursery rooms, and sports halls where impact protection underfoot is required. 👥 Expert guidance for schools, councils & contractors Our team includes former playground safety inspectors and EN1177-trained specification advisors. For project quotations, EN1177 compliance packs, quantity calculations, or school tender documentation — contact us directly. All specification support is provided free of charge. 📋 Trade & procurement accounts available Schools, local authorities, contractors and developers can apply for a trade account — volume pricing, priority dispatch, and dedicated account management. EN1177 test certificates, UKAS lab reports, and BS EN 1176 compatibility statements supplied with all orders.