Oculink eGPU Adapter, OCuLink SFF-8612 to PCIe x16 Card with Cable for eGPU
[OCuLink PCIe Adapter] RIITOP OCuLink eGPU Adapter adds a desktop graphics card to your lightweight laptop or Mini PC, transforming it into a powerful gaming machine or AI workstation [Hardware Requirement] 1. 1x Available OCuLink SFF-8612 Female Port on your laptop, Mini PC, or motherboard (if not, it needs an NVMe to Oculink Adapter which not including) 2. 1x Desktop Graphics Card or any other PCIe x16, x8, x4device you want to connect. Both NVIDIA and AMD GPU are supported. 3. 1x External 24-Pin Power: RIITOP PCIe OCulink Board requires a standard ATX 24-pin power supply to operate. However, the board itself does NOT supply power to the graphics card — so the GPU also needs powers separately from the PSU 4. Power supply sizing tip: Choose a PSU rated at least 100W higher than your GPU's listed TDP [PCIe 4.0 x4 64Gbps Ultra-Fast Speed – No Bottleneck] Powered by PCIe 4.0 x4 interface, this OCuLink adapter delivers a full 64Gbps bidirectional bandwidth —no stuttering in games, no lag in GPU rendering, and no wasted potential from your high-end graphics card. Ensure faster token generation of AI/LLM inference [Plug & Play and Important Safety Note] 1. No additional drivers are required for RIITOP OCULINK EGPU Dock itself, but Standard GPU needs drivers 2. Important: OCuLink does NOT support Hot Plugging. Always shut down your computer completely before connecting or disconnecting the cable to prevent hardware damage or data loss 3. The oculink cable in package is for external GPU applications. Not compatible with standard internal OCuLink server cables on market [Wide GPU & ATX PSU Compatibility] Designed for DIY flexibility, this open-frame card fits full-size graphics cards like RTX 4090 or RX 7900 XTX with no length restrictions. Crucially, it supports Standard ATX Power Supplies. GPU and PSU are not including [Quick Installation] Shut down PC → Connect OCuLink cable (OCuLink does NOT support Hot Plugging)→ Insert GPU → Connect 24-pin (adapter) + 6+2-pin (GPU) → PSU on → PC on → Install drivers. Tip: Set switch to "Auto" for automatic PSU sync with your computer