5681 VControl Touch/LOGO 200 V8 Super Combo, black (Pre-Order)
Must conform to the local law when using this product. Thank you! Shipping rates for this item apply to EMS or small sized air packet only. If you choose shipment by Fedex or others, extra shipping fees will be required. Since there is battery inside Vbar Control, only single carrier can ship so far. However, siturations may change from time to time. We will help to choose the appropriate courier if available. Separate email for the extra funds required will be sent after order placed. Or please put remark during ordering process or email to us info@mikadoasia.com for a manual re-calculation for you. Appreciate your understanding. Thank you very much! Note: The use of the VBar Control radio requires a VBar EVO, NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info. Software Highlights: Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio. Readily understandable graphic user interface. Easy programming for new models via the familiar VBar setup wizard. ESC setup wizard for programming all types of speed controllers. ESCs with VBar Control support can be programmed directly from the radio. Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values. Bank switching with three banks (fourth Bank Autorotation optional). Real time logging and real time graphic vibration analysis available on display. Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display. Create your own screendesign directly on the touchscreen display. Full manual available on the radio by means of context sensitive help. Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing). Automatic power-on, if an already bound model is switched on. Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware). Multiple timer functions available with warnings and reminders via sound, voice, or vibration output. Wireless buddy boxing with two VBar Control radios, fully configurable. Cloud functions under development (e.g. for archiving, interaction with other users; usage optional). Access our App Store and do over-the-air online-updates via WiFi*. Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required). Hardware Highlights: Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness. Very good readability even in bright sunlight. WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go. Very fast start-up time, from off to fully operational in three seconds. High perfomance low power controller for best user experience and long runtimes. Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system. Unlimited model memory. Virtually unlimited number of control channels. High range, low latency, antenna diversity both on transmitter and receiver. Intelligent antenna monitoring and management. Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable. Precision gimbals with four ball bearings, fully adjustable. Collective stick can be equipped with optional throw limiter. Delicate rubber lining for comfortable, slip-free and safe holding. Well-balanced with two-point neck-strap attachment, no additional retainer bracked required. Large 2 Watt loudspeaker for alarms and voice output. Vibration alarm (adjustable). Memory accessible as a USB memory stick, no drivers needed. Built-in Lithium Polymer battery allows for long run times. Charge through USB connector or built-in charger. Power supply for fast charging included. * Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan. LOGO 200 V8 BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly) Exceptional flight performance with new V8 software, comparable to larger 600-700 class helis Equally suitable for sports flying, aerobatics and 3D flying Wide range of head speeds, from 2,500-7,000+ 1/min possible Lipo 3S-650 mAh battery for flight times from 4-9 min. (included) Dual Motor System, direct drive for main and tail rotor (DShot 1000) NEW Dual ESC with metal case with full telemetrie NEW VBar EVO micro V8 Flybarless System VBar EVO already set up, no setup on your own required, just bind and fly VBar EVO Governor with RPM telemetry Micro digital servos with metal gears for the swashplate Carbon frame and landing gear Aluminum rotor head and swashplate VTX main rotor blades Glass Fiber Airbrush canopy This LOGO 200 does not support other radio systems than VBar Control Specifications VBar Control Band 2,4 GHz Flight Mode 2 Model Type misc. Telemetry with compatible sensors, ESCs, turbine ECUs Frame Rate 5 ms send/5 ms receive Range full Proportional inpits 10 analog inputs Flight Modes 3+1 Memory 128 MByte Transmitter Battery 7,000 mAh Charger Wall charger power supply Content VBar Transmitter VBar Control Touch Accessories LOGO 200 V8, bind and fly Manual English (EU) LOGO 200 Manual English *Pictures and photos for reference only.