Wheel Batts 305mm (12″) – WB4AH

WB4AH – Pack of 5, Water resistant 9 mm thick MDF wheel batts 305 mm diameter – with 10 mm holes drilled (or your advised batt pin head size) at your advised distance – Rohde is 250 mm, if bought from CTM usually the Frema, Shimpo, Bailey, BTH etc wheel heads have batt pins at 254 mm (10 “) but please check. Wheel batts give you time for the piece to dry a little before you cut it off whilst throwing on another batt. Do NOT soak the batts to clean them they will bloat.