MX Hazard Zone Meters - Macnaught Canada

Macnaught Hazard Zone Overview Macnaught MX ExD, Intrinsically Safe, and Simple Safe Flow Meters were designed, certified and approved for most fluid Hazard Zone Atmospheres. Macnaught Hazard Meters are for clean process fluids and do not measure gases of fluids with solids. Clean Process Liquids only. The MX Hazard Meter offering provides inline .5% Volumetric Accuracy with .03% Repeatability. In Stock Sizes ¼” thru 4” .13 GPH to 320+ GPM No Flow Conditioning - put the meter where you want it Large in-stock inventory of Hazard Meters and Displays Quick response to Hazard Meter inquiries Receive an Immediate Flow Meter Proposal or Call our Meter Hotline - (647) 427-8771 METER RFQ FORM NFPA 70 NEC Location Classes, Divisions, and Groups Class I definition: Flammable gases or vapors may be present Div 1 definition: Ignitable concentrations of hazards exist under normal operation and/or where the hazard Is caused by frequent maintenance or repair work or frequent equipment failure Div 2 definition: Ignitable concentrations of hazards exist under abnormal operation conditions Group A: Acetylene Group B: Hydrogen, Butadiene, Ethylene, Oxide, Propylene Oxide, and Acrolein Group C: Ethylene, Cyclopropane, Ethyl Ether Group D: Acetone, Ammonia, Benzene, Butane, Ethanol, Gasoline, Hexane, Methane, Methanol, Naphtha, Natural Gas, Propane, and Toluene Hazard Zone / Class FAQ Q: Can I use a piece of equipment approved for use in a Division 1 hazardous location in a Division 2 hazardous location? A: Yes. If equipment has been approved for use in a Division 1 hazardous location, it can be used in a Division 2 hazardous location, providing it is in the same class and group. Q: Can equipment approved for a Class I hazardous location be used in a Class II hazardous location? A: No. Equipment approved for use in Class I hazardous locations cannot be used in Class II hazardous locations. Q: Are Divisions and Zones equivalent to one another? A: When comparing Divisions and Zones, Division 2 is equivalent to Zone 2, but Division 1 is equivalent to either Zone 0 or 1 Contact Macnaught Canada for approved Hazard Zone Liquid Flow Meters – the leading global manufacturer of specialized Oval Gear & Turbine Flow Measurement Devices. Receive an Immediate Flow Meter Proposal or Call our Meter Hotline - (647) 427-8771 METER RFQ FORM ExD Specs ExD Quick Specs Macnaught ExD Flow Meters and Displays meet all ExD (Flameproof) CID1 approvals and certifications. FM-US and FM-CA, ATEX and IECEx approved and certified. Macnaught MX ExD Quick Specifications Model Size Connection Flow Range Max Pressure Max Temp Body Rotor MOC MX06 ¼” .13-26 GPH 1,000 PSI 284F SS-AL / SS MX09 ¼” 4-132 GPH 1,000 PSI 284F SS-AL / SS MX12 ½” .5-8 GPM 2,000 PSI 284F SS-AL / SS MX19 ¾” .8-21 GPM 2,000 PSI 284F SS-AL / PEEK-SS MX25 1” 1.6-32 GPM 2,000 PSI 284F SS-AL / PEEK-SS MX40 1.5" 2.6-66 GPM 1,500 PSI 284F SS-AL / PEEK-SS MX50 2" 4-200 GPM 1,200 PSI 284F SS-AL / PEEK-SS MX75 3” 5-194 GPM 175 PSI 284F AL / AL MX100 4" 31-320+ GPM 175 PSI 284F AL / AL FM-US and FM-CA Certification Markings: USA & CAN: Class 1 Division 1 GROUP ABCD T6...T3 Class 1, Zone 1, AEx/Ex db IIC T6...T3 Gb T3 @ Ta = -50°C… +140°C ATEX and IECEx: ATEX & IECEx: II 2 G Ex db IIC T6...T3 Gb, T3@ Ta = -55°C… +140°C Macnaught ExD Downloads MX Hazard Manual > Download PDF E110 C1D1 Display Datasheet > Download PDF Wiring ExD Meter to E110 Display > Download PDF PD6830 C1D1 Display Datasheet > Download PDF Wiring ExD Meter to PD6830> Download PDF Notes: MX ExD Sensor Type is NPN Operating Voltage: 5VDC-27VDC @ < 15mA Standard Cable Length: 3 Meters Minimum Temp: -58F Large ExD Meter and Display Inventory in Tampa FL Stock Call our Meter Hotline (647) 427-8771 or use the RFQ Form Link Below METER RFQ FORM Macnaught Canada can review your Hazard application and determine best fit. Contact our Meter Hotline at (647) 427-8771 Or Complete our Meter RFQ form for an immediate proposal METER RFQ FORM ExD Video Overview