Bambu Lab P2S VentoBox 2 Stage Filter

Designed by Thrutheframe · Manufactured by DREMC ventoBox is an air filtration solution designed specifically for the Bambu Lab P2S. Developed by Thrutheframe and produced in partnership with DREMC for the AU region, ventoBox is designed from the ground up to deliver effective filtration without compromising airflow or chamber performance. At its core is a 7530 blower fan that moves air through HEPA and activated carbon filters to help reduce airborne particles and odours generated during printing. When used, ventoBox acts as a first line of defence against fumes and VOCs, helping keep workspace air cleaner while you print, especially in home or shared environments. Additional Information: https://makerworld.com/en/models/1969900-ventobox-air-filter-system-for-bambu-p2s Features: Dual Operating Modes: Single-Pass Mode Designed for materials such as PLA and PETG, Single-Pass Mode allows ventoBox to operate as an exhaust path. Air is drawn from the printer chamber, passed through the filtration stack, and expelled as filtered air outside the printer. This mode is well-suited for lower-temperature printing, helping manage chamber conditions while providing cleaner air in home or work environments. Multi-Pass Mode For higher-temperature materials such as ABS, ASA, and Nylon, ventoBox operates in Multi-Pass Mode. Warm air is drawn from near the build plate and redirected toward the lower section of the chamber to promote a more consistent temperature throughout the build volume. This recirculation of warm air helps stabilise the thermal environment required for these materials. What is Included: Fully Assembled: A part assembled ventoBox ready to go (after you install hepa filter/load the carbon), includes all the hardware needed to mount and install the ventoBox unit. 1x Hepa filter Note: Carbons are not Included (10% discount on Nevermore with purchase of VentoBox) Hardware kit (includes 4 pin compatible fan) Need to print your own parts (6hrs 30mins), assemble (10-15mins) and install (30mins) Includes: All fasteners, double-sided tape, 7530 fan, one Hepa Filter. Note: Carbons are not Included (10% discount on Nevermore with purchase of VentoBox) Manufactured in Australia by DREMC, ventoBox is printed with DREMC filament (PC ABS).