Helix Shift 6CH – 12V Smart DC Controller

Helix Shift 6CH is a six-channel 12V smart DC controller designed for compatible electrical circuits in vans, RVs, campers, and professional mobile builds. Instead of treating every circuit as a simple ON/OFF switch, Shift 6CH gives builders and owners a focused control layer for six independently controlled 12V DC outputs. Configure and operate channels through the Nomadic Helix Controls app while retaining compatible hardwired momentary-switch inputs for local physical control. Each channel can be configured for supported operating modes including Standard, Dimmable, Triple Burst Flash, Single Flash, and Turn Signal Flash. The Helix interface also provides Cloud Schedule, Countdown, Interlock, channel organization, and controller-reported status information. Six independently controlled 12V DC output channels 8A maximum output per channel 18A maximum combined output across active channels Six normally open momentary-switch inputs Nomadic Helix Controls app configuration and control App-adjustable dimming for compatible loads in Dimmable mode Cloud Schedule, Countdown, and Interlock tools 2.4GHz Wi-Fi with Bluetooth used during initial pairing Controller-reported current information in Standard and Dimmable modes Designed for dry, protected interior installation Important: Shift 6CH is not a universal power-distribution controller. Connected equipment must meet the published voltage, current, startup-current, polarity, load-type, and control requirements. Motors, pumps, compressors, heaters, solenoids, ignition circuits, and other inductive or high-inrush loads should not be connected directly unless specifically confirmed compatible. For unusual loads or system designs, contact Nomadic Support before installation.