SF3000-A Aerosol Prop Paint - Gloss White

SF3000-Series Propeller Paint Very fast dry, high-quality interior/exterior grade epoxy enamel aerosols designed for OE repair that will adhere to most metal substrates, some plastics, and previously painted surfaces and are custom matched to your color and gloss specifications. Product Details: Excellent exterior color and gloss retention Compliant with EPA & CA regulations and meets the MIR requirement for all aerosol formulations Air dry or low temperature cure For use on bare metal or painted surfaces Surface Preparation: The surface must be clean and free of oil, grease, and other contaminants. For best application properties, paint should be above 60°F (85°F maximum) before application. Additional Information: Shake aerosol can vigorously for several minutes prior to spraying to fully mix contents After using, hold can upside down and depress spray nozzle to clear residual paint prior to extended storage Do not apply at temperatures below 50°F Higher gloss will result in low gloss formulations if coating is force dried Excess film thickness will retard dry times and affect the recoat window Do not attempt to use this product without the current Safety Data Sheet Flammability: Extremely Flammable (aerosols); Flammable (liquid) Keep away from open flame Safety: Before using any Superflite product be sure to read all MSDS, application instructions and warnings. Always wear a properly fitted air purifying respirator with organic cartridges and a particulate filter or a fresh air supplied respirator (depending on product selection), eye protection, gloves and protective clothing while exposed to any chemical.