Siser Metal | Cut-Only Heat Transfer Vinyl

Siser Metal | Cut-Only Heat Transfer Vinyl Overview Siser Metal heat transfer vinyl is a 60 micron foiled PU film with a smooth metallic finish. It is designed for decorative garment graphics where a clean Silver or Gold effect is required. The material combines a shiny surface with a soft hand after application. Smooth Metallic Finish Siser Metal provides a polished metallic appearance on suitable garment graphics. The foiled PU construction creates a brighter finish than conventional smooth HTV. It is well suited to logos, lettering and decorative fashion graphics. 60 Micron Foiled PU Construction Siser Metal uses a 60 micron foiled polyurethane face film. The thin construction helps retain a relatively soft feel on the finished garment. It is designed for straightforward cut-only production. Silver and Gold Options The current live range is available in Silver and Gold. Both colours provide a classic metallic appearance for garment decoration. Adhesive Polyester Liner Siser Metal is supplied on an adhesive polyester liner. The liner supports controlled cutting, weeding and positioning before heat application. Compatible Garment Fabrics The current specification lists 100% polyester and 100% cotton. It is also suitable for poly/cotton blends. Always test unfamiliar garments before beginning full production. Not for Dye-Sublimated Fabrics The current product information states that Siser Metal is not suitable for dye-sublimated fabrics. This restriction should be considered before selecting the garment. 150°C Application Temperature The current application temperature for Siser Metal is 150°C. The stated pressing time is 10 seconds. Medium pressure of approximately 2.5–3.5 bar is recommended. Cold Peel Application The current product specification requires cold carrier removal. Allow the application to cool before removing the carrier. Cutting and Weeding The current specification recommends a 45-degree blade. A cut pressure between approximately 40 and 90 gf is listed. Always confirm final cutter settings before beginning production. Laser-Friendly Material The current product information identifies Siser Metal as laser friendly. Follow the equipment manufacturer’s guidance when using laser cutting equipment. 500mm Width and Multiple Roll Lengths All current live Siser Metal variants are 500mm wide. Available roll lengths are 1 metre, 5 metres, 10 metres and 25 metres. The current product contains eight variants across colour and length combinations. Professional Metallic Garment Graphics Siser Metal combines a smooth foiled finish with practical cut-only garment production. It is designed for decorative applications where a clean metallic effect is required. Run by printers, for printers. Check out our YouTube channel for videos on different heat transfer vinyls