IsoTek EVO3 Optimum Link Cable

IsoTek EVO3 Optimum System Link Cable The IsoTek EVO3 Optimum Link Cable connects a compatible IsoTek System Link powerCON outlet to an appropriately terminated audio component or another supported IsoTek unit. The cable uses three 3.0mm² silver-plated Ohno Continuous Cast copper conductors, a fluorinated ethylene propylene (FEP) dielectric and an earthed oxygen-free copper shield. It is intended for planned power distribution layouts that support IsoTek's System Link system, not for direct use as a standard wall-plug power cable. High-Purity Copper Construction Square-strand OCC conductors The three 3.0mm² conductors use silver-plated Ohno Continuous Cast copper, with individual square-profile strands arranged for a tightly packed conductor assembly. The parallel geometry incorporates a gentle twist intended to help manage electromagnetic and radio-frequency interference. Insulation and Shielding FEP dielectric and braided screen FEP insulation, a cotton filler, a Mylar wrap and an oxygen-free copper shield form the cable's layered construction. Together they help protect the conductors and manage incoming electrical interference. Results in a system will depend on the connected equipment and local electrical environment. System Link Connections Choose the correct equipment inlet One end uses an IsoTek-compatible Neutrik powerCON System Link connection. Equipment-end options in the available range include IEC C15, C19, C7 (figure-eight) and another compatible Neutrik connection. The correct termination depends on the equipment to be powered; these connectors are not interchangeable. Available Variants Connector and cable length C15: 0.5m, 1m and 2m C19: 0.5m, 1m and 2m C7 (Figure 8): 0.5m, 1m and 2m Neutrik: 0.5m, 1m and 2m Key Features Designed for compatible IsoTek System Link outputs Three silver-plated 3.0mm² OCC copper conductors Square-strand conductor construction FEP dielectric and OFC screening Choice of equipment-end connector 0.5m, 1m and 2m options Specifications Specification Details Product IsoTek EVO3 Optimum Link Cable Purpose System Link power connection for compatible equipment Source connection Neutrik powerCON Equipment-end options C15, C19, C7 or Neutrik Length options 0.5m, 1m, 2m Conductors 3 x 3.0mm² silver-plated OCC copper Dielectric FEP Shield Oxygen-free copper Filler/barrier Cotton / Mylar Detailed Technical Specifications For those who like to drag out all the useful bits View full technical specificationsConductor Design Three 3.0mm² silver-plated Ohno Continuous Cast copper conductors Square-profile individual strands Parallel conductors with gentle rotational twist Insulation and Connectors FEP dielectric Cotton filler and Mylar barrier Oxygen-free copper screening Neutrik powerCON System Link output connection C15, C19, C7 and Neutrik destination configurations 0.5m, 1m and 2m lengths Important Notes Use only with a compatible, appropriately rated IsoTek System Link output. Choose the correct destination connector and check the supplying device's maximum supported load. Do not modify mains-rated connectors or use this cable as an ordinary Australian wall-plug power lead. Confirm exact configuration, price and supply before ordering. The Audio Experts Take Optimum Link is for a specific job: connecting compatible components within an IsoTek power-distribution setup. Its screened, high-purity conductors are part of a substantial cable construction, but the most important buying decision is getting the correct System Link connection, equipment-end termination and cable length. We would check the equipment inlet and plan the route behind the rack before choosing. A short run with enough clearance for the connectors generally makes for a neater and more practical installation than unnecessary spare cable.