Hollis Angled Alabaster Wall Lamp

Hollis Angled Alabaster Wall Lamp The Hollis Angled Alabaster Wall Lamp sets two panels of natural alabaster against each other at an angle, meeting at a low point in the centre so the pair reads as a single folded form. Light sits behind the join and passes outward through the stone, so both panels glow while the source itself stays hidden. Because the panels are cut from natural alabaster, the veining across each one differs, and the angle between them means the two faces catch light at different intensities — one always slightly brighter than the other. It projects just over five inches from the wall, shallow enough for a hallway or a bedside. Measures L 14.6″ × H 9.4″ × D 5.1″ in alabaster with brass fittings, for hardwired wall installation. Takes one G9 lamp (not included; a 3000K warm white suits it best). Choose a single fixture for a focused accent, or a Set of 2 to frame a bed, mirror, or entryway. A Set of 2 includes two complete lights, individually packaged and shipped together in one order. ✎ The Story Two panels of alabaster, and neither one lights the same as the other. Set at an angle to each other, they sit at different distances from the source behind the join. One face always runs slightly brighter. The Hollis Angled Alabaster Wall Lamp is built on that imbalance rather than around it — a flat panel would have been easier and far less interesting. The stone adds a second layer of difference. Every panel is cut from natural alabaster, so the veining running through yours belongs to that block alone and will not appear on any other fixture. ✦ Design Notes Five Inches Off the Wall The Fold Hides the Source Light sits behind the low centre join, so nothing is visible from any approach — only the stone lit from within. At just over five inches deep it stays out of the way in a hallway or beside a bed. Alabaster's Warm Inner Glow Light passes through the stone, never around it. Veining Unique to Yours Cut from natural stone, so no two match. Two Faces, Two Tones The angle keeps one panel brighter than the other. ☰ The Details Material Alabaster Finish White Control Push-button switch (not dimmable) Mounting Wall, indoor · approx. 6.6 lbs Power AC 110–120V · no driver required G9 base · LED or Edison bulb Max 15W per bulb ◫ Product Size ✕ Size Size (cm) Size (inch) Size1 L 37 cm x W 13 cm x H 24 cm L 14.6″ x W 5.1″ x H 9.4″ ☼ The Craft ALABASTER CRAFTSMANSHIP Cut from Stone, Finished by Hand Natural Stone, Shaped with Care Each panel is cut from a solid block of natural alabaster, then ground and hand-finished until the walls run even enough to pass light. Too thick and it stays dark; too thin and it loses the veining — the whole craft sits in the millimetres between. 01Cut, Not Cast Shaped from a solid block, never poured into a mould. 02Veining Kept Visible Finished to a soft surface that shows the stone's own markings. 03No Two the Same Every block carries its own pattern of veins and translucency — the panel you receive is unlike any other, and the same stone will still be reading warm decades from now. If you have any questions about our products, please contact us and we'll get back to you within 24 hours. Better Together Style it as a set. For a collected, designer-styled room, pair it with matching pieces like the Corin Alabaster Wall Sconce. View Now