Mazda BT-50 Carbon Flat-Bottom Steering Wheel Core (2020–2025)

Steering Wheel Core · Mazda BT-50 · 2020 to January 2025 (TF Series) The BT-50 interior upgrade you notice on every drive. The factory wheel is round, plain, and covered in whatever rubber Mazda fits from the factory. This replaces the frame with a flat-bottom, carbon-style, leather-gripped core — while keeping every bit of your factory safety, every button, and every control exactly where it was. In stock — ready to ship. Order now and it goes out fast. 12-month warranty and 30-day store credit apply. Confirmed fitment ✔ Direct fit — Mazda BT-50 TF-series, 2020 to January 2025 Grade Cab / Body Drive XS Single, Dual Cab Chassis & Pickup 4x2 / 4x4 XT Single, Freestyle & Dual Cab Chassis / Pickup 4x2 / 4x4 XTR Dual Cab Chassis & Pickup 4x2 / 4x4 GT Dual Cab Pickup 4x4 SP Dual Cab Pickup 4x4 Thunder Dual Cab Pickup 4x4 Quick way to check: look at your grille. If it has a small Mazda badge and rounded headlights, this fits. The January 2025+ facelift has a much larger Mazda badge and slimmer, L-shaped LED daytime running lights, similar to a Mazda CX-5. Manual & automatic, with or without steering wheel buttons. Not for the earlier model (2011–2020, Ford Ranger-based BT-50) — different spline and mounting pattern. Not for the January 2025 facelift onwards — that update changed the exterior and infotainment significantly. Still not sure? Check your build date on the compliance plate, or message us a photo and we'll confirm. What "core" means — and why it's the right way What's new Flat-bottom wheel frame Carbon-style upper & lower sections Leather grip zones Reinforced internal frame, OEM dimensions What transfers from your wheel Factory airbag — same mounting points, same deployment geometry Steering wheel buttons — same harness, same function Trims, covers and factory wiring Why a core, not a full wheel? Replacing the frame while reusing your factory airbag and controls means your safety systems remain completely unchanged. It's the correct approach — and it's why your airbag ends up exactly where the factory put it. Also worth knowing More leg clearance getting in and out — noticeable on the first drive Leather grip is cooler in summer, warmer in winter than factory rubber Install — 45 to 60 minutes 10mm socket (battery) 19mm deep socket (steering nut) Flathead screwdriver (airbag clips) 1 Disconnect the battery 10mm socket, wait for system capacitors to discharge — standard safety step before any airbag work. 2 Remove the factory airbag and wheel Flathead screwdriver releases the airbag clips. 19mm deep socket removes the steering wheel nut. The wheel lifts off the spline. 3 Transfer your components Airbag, buttons and trims move from your old wheel to the new core, straight onto identical mounting points. 4 Fit the new core and reconnect Seat the core on the spline, torque the nut, reconnect the battery. Step-by-step guide and video link included. Prefer a workshop? Any mechanic can do this in under an hour — just show them the guide. Message us if you'd like a recommendation. Common questions Does this fit the new 2025 BT-50?+ No — this fits the 2020 to January 2025 model, before the facelift. The easiest way to check: the January 2025+ facelift has a much larger Mazda badge on the grille and slimmer, L-shaped LED daytime running lights (similar to a CX-5). If your BT-50 has the smaller badge and rounded headlights, you're on the older model this fits. Still unsure? Message us your build date or a photo and we'll confirm. Will disconnecting the airbag cause a dash warning light?+ It's the same airbag, same connector and same wiring — just moved to the new core. Nothing about the electrical circuit changes, so there's no expected reason for an SRS fault. As with any airbag work, disconnect the battery first and reconnect everything securely. Is this road legal in Australia?+ This is a direct replacement that retains your factory airbag in its original mounting position. We recommend checking with your state's vehicle standards authority or insurer if you have specific concerns about your registration or policy. What if I've never worked on a steering wheel before?+ The install guide and video link cover every step. Most first-timers complete it in under an hour. If you're not comfortable, any mechanic can do it quickly — message us if you'd like a recommendation. What's the returns policy?+ 30-day change-of-mind store credit on unused items. Faulty unit? We cover return shipping and replace it under the 12-month warranty. Full policy here. What's in the box Flat-bottom wheel core Carbon-style upper & lower trim Leather grip side sections Step-by-step install guide + video link Factory airbag, buttons and trims are reused from your existing wheel — not included in the box. Your purchase is protected 12-month warranty from dispatch 30-day change-of-mind store credit on unused items 5,500+ rigs upgraded, Aussie-owned NSW-based team — message us anytime Factory-plain today. Yours, on every drive from here.