Creality Hi Z-Axis Limit Switch – Right Side
Creality Hi Z-Axis Limit Switch – Right Side – Genuine OEM Replacement – 2101030259 The Creality Hi Z-Axis Limit Switch – Right Side is a genuine OEM replacement endstop switch designed specifically for the Creality Hi 3D Printer. Installed on the right side of the Z-axis system, this mechanical limit switch detects the designated end position of the Z-axis during homing and positioning operations. Accurate endstop detection is essential for proper Z-axis movement, synchronization, calibration, and safe printer operation. This replacement component is ideal for repairing a Creality Hi with a damaged, worn, or malfunctioning right-side Z-axis limit switch. Product Function The Z-axis limit switch provides the printer with a physical reference point for vertical movement. When the Z-axis reaches its designated limit position, the switch is activated and sends a signal to the printer's control system. Proper operation helps provide: Accurate Z-axis homing Reliable end-position detection Correct vertical positioning Proper Z-axis synchronization Protection against excessive mechanical travel Consistent startup and calibration Reliable printer operation Key Features Genuine Creality OEM replacement component Designed specifically for the Creality Hi Right-side Z-axis limit switch Creality Part Number: 2101030259 Mechanical endstop design Accurate Z-axis position detection Helps maintain proper Z-axis homing Supports reliable printer calibration Direct replacement for the original switch Compact factory-style construction Ideal for maintenance and printer repair Specifications Brand: Creality Product Type: Z-Axis Limit Switch / Endstop Switch Creality Part Number: 2101030259 Compatible Printer: Creality Hi Installation Position: Right Side Axis: Z-Axis Switch Type: Mechanical Limit Switch Function: Z-Axis End Position Detection / Homing Application: FDM/FFF 3D Printing Installation: Direct OEM Replacement Right Side vs. Left Side The Creality Hi uses separate limit switches for the left and right sides of the Z-axis system. Right Side: Creality Part Number 2101030259 Left Side: Creality Part Number 2101030260 Although the two switches perform similar functions, they are designated for different installation positions. Always verify which side requires replacement before ordering. When Should the Z-Axis Limit Switch Be Replaced? Consider replacing the switch if you experience: Z-axis homing errors Printer unable to correctly detect the Z-axis limit Z-axis continuing to move after reaching its end position Inconsistent homing Abnormal Z-axis movement during startup Mechanical switch no longer clicking properly Intermittent endstop detection Physical damage to the switch Damaged connector or PCB Printer errors associated with Z-axis positioning Before replacing the switch, inspect the wiring and connectors to make sure the problem is not caused by a loose or damaged electrical connection. Installation Recommendations Power off and unplug the printer. Identify the right-side Z-axis limit switch. Carefully disconnect the original switch. Remove the mounting hardware. Install the replacement switch in the same orientation. Reconnect the electrical connector securely. Check that the switch can be mechanically activated without obstruction. Power on the printer and perform the recommended homing/calibration procedure. Package Includes 1 × Creality Hi Z-Axis Limit Switch – Right Side Important Notes This listing is specifically for the RIGHT-SIDE Z-axis limit switch. Creality Part Number: 2101030259 Do not confuse it with the left-side version: Left Side Part Number: 2101030260 Always power off and unplug the printer before servicing mechanical or electronic components. Verify your printer model, installation side, and original part before ordering.