Modern 40.69 Interior Pull Handle Active door with Thumb latch

1/2 Handle set - Special Pack, Special Price Interior Handle Only with Thumb Latch and screws for 1" to 1-1/4" Door Will fit thicker doors with longer screws. See Additional Information Below This is the inside only, the outside Exterior handle is needed to make a complete handle set Applications: Residential and Commercial sliding doors. Aluminum, Wood, Vinyl and Composite Function: Interior Pull Handle with thumb latch Screw Hole Centers: 3-15/16 inch Thumb Latch Position: Adjustable Escutcheon Plate Width: 1 inch Escutcheon Plate Length: 10 inch Escutcheon Plate Thickness: 3/8" Screw Stud Post Depth: 1/2" Handle Projection: 1-7/8" Base Material: Zinc Color: Matte Black, White and Faux Bronze Additional Information: Amesbury Truth Arch 40.69 Series Sliding Patio Glass Door Handleset Screw lengths vary based on door thickness This kit comes with 8-32 x 1-5/8" screws and thumb latch for a 1" to 1-1-/4" thick door The thumb Latch tail piece extends 9/16" 1-1/4" thick door will need 1-1/2" Screw 1-1/2" thick door will need 1-3/4" Screw 1-3/4" thick door will need 2" Screw NOTE 1: The flat tail piece on the thumb latch protrudes 9/16" Will fit doors up to 1-1/2" when mortise lock in door is centered or 1-3/4" thick doors when mortise lock is offset to the inside, like some Caradco and Jeldwen doors. Note 2: * When used with exterior keyed lock, the flat tail piece will meet with the keyed tail piece in the center of the mortise lock. If either flat tail piece is to long it puts a bind on the key and makes it hard to turn. * With a 1-3/4 inch thick door the tail piece on the thumb latch should be 1/2 the door thickness, minus 1/16 inch. The tail piece would project 13/16 inch or slightly less than 7/8 inch Related Parts:# 14278-1.25" Tail Piece for Thumb Latch, 1-1/4" Length, Projects 1-1/16" for Doors over 1-3/4" to 2" #14322 - Thumb Latch with extra long 2" tail piece