AC Infinity UIS Daisy Chain Splitter

When several compatible devices need to follow one controller port and shared programme, the AC Infinity UIS Daisy Chain Splitter provides a two-port dongle at each piece of equipment as an automation setup grows over time. This device-by-device approach lets the chain continue through an input and an output instead of requiring a larger controller. Customers choose between the UIS version for AC Infinity's own control network and the RJ11/12 lighting version for controllers that use telephone-style dimming ports. Exact models, supplied accessories and connection limits remain in Technical Specifications.Both versions use a right-angle male UIS plug at the device and a small block with two directional female ports. The controller feed enters the INPUT port, then the OUTPUT port runs to the next adapter. Those ports are not interchangeable. The UIS version uses AC Infinity's proprietary USB-C-shaped connector and includes a female-to-female coupler for devices that end in a male lead; each link still needs a male-to-male UIS cord, which is not supplied with the dongle. The RJ11/12 version is for compatible grow lights, includes an RJ11 extension cable and can also reach a UIS controller through the correct lighting adapter.A daisy chain is useful when several devices genuinely need to behave as one group. Every unit on the chain follows the triggers, timer, cycle or schedule assigned to that controller port, so equipment needing different behaviour belongs on separate ports. AC Infinity require devices in one chain to be the same type and require chained grow lights to be from the same series.NOTE: UIS is AC Infinity's proprietary control connection, not a standard USB-C data or charging connection. The RJ11/12 model carries a dimming signal only and cannot power a UIS controller. A separate powered UIS device or suitable power adapter is still required for the controller.