Stock Upgrade One Piece Driveshaft | RAM 3500 4WD Truck (2019-2024) | Aluminum | 1555 Series | 4.6" OD

Custom Driveshaft - Aluminum, 4.6 Inch OD, 1550/1555 Series Dodge Ram 3500 4x4 Truck - 2019 to 2024 Upgrade your OEM one piece aluminum or convert your OEM steel two piece into a one piece heavy duty 4.6 inch aluminum driveshaft. FREE GROUND SHIPPING INSIDE THE USA (This product does not qualify for international shipping) Notes Specs Vehicle Fitment Tubing Heavy Duty 4.6 Inch Aluminum Driveshaft This driveshaft fits most 2019 to 2024 Dodge Ram 3500 4 Wheel Drive trucks. This driveshaft fits most 4WD cab and bed combinations, it does not fit wheel base 172.4". Use this driveshaft to upgrade your existing one piece driveshaft or to convert your two piece driveshaft into a heavy duty one piece. We will need you to measure for the driveshaft to verify proper fit. Measuring is very easy to do - just follow the diagram below. Dodge Ram driveshafts are notorious for driveshaft vibrations and component failures. Countless customers complain of their OEM two piece shaft having repeated and expensive carrier bearing failures. Our Aluminum eliminates the carrier bearing for a stronger, more reliable driveshaft. This driveshaft is heavy duty from end to end. We use only the highest quality 1550/1555 universal joints from top brands such as Spicer or Neapco. The Aluminum tubing is 4.6 inch OD Arconic premium aluminum seamless material that is 1/8 inch thick -- rated for over 7,000 ft/lbs of torque! It will handle even the heaviest towing loads. Most of the OEM one piece aluminum shafts are only 0.083 inch thick. The driveshaft comes fully assembled, balanced and ready to bolt in. Installation is as simple as sliding in the transfer case yoke and bolting up the flange. It is not common but it is always a good idea to check for clearance issues with the carrier bearing cross member to ensure that the cross member does not need to be removed. This is a 100% new 4.6 inch aluminum driveshaft including a new transfer case slip yoke, new driveshaft and new flange. This is an all new direct replacement driveshaft. All you have to do is remove your old shaft and bolt up the new shaft. You won't be disappointed with your Ram 4.6 inch aluminum driveshaft. Time and again customers are impressed at how well made the driveshaft is and better yet, how it helps solve vibration and carrier bearing problems - no matter if is a daily driver, over the road towing rig or pulling truck. Free Ground Shipping Seamless Arconic Aluminum Tubing Precision Balancing Premium Sealed OEM U-Joints Custom Length Options Lifetime Weld Warranty . Weld Yoke Material: Aluminum 6061-T6 Forged Yoke Tube Material: 0.124.6 Inch Wall 6061-T6 Seamless Tube Outside Diameter: 4.6 Inch OD (Measuring Guide - Tube OD) U-Joint: Neapco 3-0155G Universal Joint Spicer SPL70X Universal Joint U-Joint Information: 1550 Series / Premium Non-Greasable 1.375" Cap x 4.969" Span (Measuring Guide - U-Joint) Max Custom Length: Measure from Seal to Flat Max Length 93.4.6 inches and Seal to Flat Transmission Slip Yoke: Included Flange Yoke: Included Vehicle Fitment Model: Dodge Make: Ram 3500 Years: 2019-2024 Drive Type: 4WD Cab/Bed Sizes: Regular Cab - Short Bed and Long Bed Quad Cab - Short Bed Crew Cab - Short Bed Mega Cab - Short Bed U-Joint Series: 1555 Engine: Diesel Transmission: Automatic Quality Aluminum Tubing Action Machine Inc.: Heavy Duty Tubing The Others: Thin Wall Swedged Tubing The Action Machine driveshaft is a heavy-duty driveshaft made to last. You will find cheaper Ram aluminum driveshafts on the internet but that is what they are €“ cheaper in price and quality. When you see other aluminum driveshafts with tubing that is bigger in the middle and smaller at the ends, that is a thin wall 0.074.6 inch aluminum which is light duty OEM material. Our 1/8 inch thick heavy duty Arconic brand tube is made with an even wall thickness and extra straight from end to end to run vibration free and for incredible torque performance. Some driveshafts with cheaper prices have conversion u-joints that step from one u-joint size to another or greaseable u-joints. Conversion and greaseable u-joints are not as strong as the cold forged solid cross u-joints that we use and have more play. Many of the cheaper shafts have cast weld yokes at each end while ours are USA made forged weld yokes. In fact, every part of our driveshaft from end to end is USA made premium product assembled, welded and balanced by our team here in Indiana. You can't compare the quality, durability and life you will get from our driveshaft to other lower cost driveshafts out there. Required Driveshaft Measurements: You can place your order today and we will send a follow up email requesting your driveshaft length or your can submit your measurement below. Measure from the transfer case seal to the flat face of the differential where the driveshaft 4 bolt flange mounts. We cannot complete your driveshaft order until we have your driveshaft length. If you have any questions we are here to help: CHAT | PHONE (574)287-9650 | CONTACT US FREE GROUND SHIPPING INSIDE THE USA (This product does not qualify for international shipping)