Chicago Pneumatic Ironman 10-270 Air Compressor (270L, 3 Phase)

The Chicago Pneumatic Ironman 10-270 is the largest compressor in our range. A 10 HP four-cylinder cast iron pump delivering 36 CFM usable output, enough to support around five air tools running simultaneously. 415V 3-PhaseCast iron77+ dB(A) at 1mHeavy duty PowerRequires three-phase power at 23.7 Amp. This is a substantial load, confirm your switchboard capacity. WorkloadBuilt for high-volume continuous operation with around five operators using air at once. Noise77+ dB(A) at one metre. Best placed in a plant room or away from customer areas. Air qualityOil-lubricated. Fit a filter and water separator before any tool used near paint or interiors. Best suited to Ideal for Five plus bay workshops High-volume commercial detailing facilities Multiple operators working simultaneously all day Workshops planning future expansion Not the right choice if You do not have three-phase power with adequate capacity You have fewer than four operators, a smaller unit is more economical Access or floor space is limited, it is 2 metres long and 290 kg What it can handle Application Suitability Blow gun / drying Comfortable Interior cleaning gun Comfortable Air sander or polisher Comfortable, multiple operators supported Three to four tools at once Comfortable Five tools at once Suitable, this is what it is designed for Six or more tools Contact us to discuss your requirements Tool and application suitability above is general guidance based on typical air consumption, not a performance guarantee. Actual results depend on your tools, air line setup, working pressure and how continuously you run them. If you are unsure whether this compressor suits your specific setup, get in touch before ordering. Before you order: Requires three-phase power with adequate current capacity (23.7 Amp draw). At 290 kg and 2 metres long, confirm access and placement before delivery. Specifications Specification Detail Motor 10 HP / 7.5 kW Piston displacement 51.9 CFM / 1470 L/minWhat the pump moves. Free air delivery 36.0 CFM / 1020 L/minUsable output. Size your tools against this. Maximum pressure 10 bar / 145 psi Tank 270 litres Power supply 415V three phase, 23.7 AmpHigh current draw, confirm your supply capacity. Pump speed 810 RPM Noise level 77+ dB(A) at 1 metre Pump type Cast iron piston, 4 cylinder / 1 stageFour cylinders for maximum output. Weight 290 kg Dimensions (L x W x H) 2000 x 710 x 1370 mm Warranty 2 years on the pump Choosing the right option Choose this if you are running a full ring main with five or more outlets in constant use, or planning for growth. Step down if you have three or four operators. The Ironman 7-270 is more economical for that workload. Planning a ring main? Use the Air Line Configurator to size your pipework and get a full parts list. Common questions How many tools can it run at once?Around five, based on 36 CFM usable output against typical detailing tool draw of 5 to 7 CFM each. High-draw tools will reduce that figure.What power supply do I need?Three-phase at 23.7 Amp draw. This is a substantial load, so confirm your switchboard has capacity before ordering.Is this overkill for a detailing business?For most single-site detailing operations, yes. This suits high-volume facilities with five or more simultaneous air users. If you are unsure, get in touch and we can size it properly.How is it delivered?At 290 kg and 2 metres long it requires mechanical handling and clear access. Contact us to discuss your site before ordering. Planning a full compressed air setup? Plan Your Air Line Compare All Compressors