EasyStand Zing MPS TT Size 1 (PA5520TT) Tilt-Table Multi-Position Pediatric Stander | Supine-to-Prone, 30° Abduction

Configured to the child from over 70 components, specified by the treating therapist. Send the recommendation to (866) 338-2838 or info@morellimedical.com for a free quote. Zing MPS TT Size 1 · PA5520TT The tilt-table Zing: full-back support, supine to prone in one motion Everything that defines the Zing MPS — the two-direction pivot from supine through vertical to 20° prone, 30° of leg abduction, the swing-away tray — with the individual pelvic and back pads replaced by a single longer, wider tilt-table pad with padded strapping. Simpler to set up; MPS components still bolt on wherever more support is needed. Size 1 fits up to 44″ and 70 lb. Who it fits Children up to 44″ (112 cm) and 70 lb (32 kg), roughly 9 months to 6 years — particularly those who benefit from broad, continuous back support rather than segmented pads. Why tilt-table style One 14″-wide pad supports pelvis and trunk together with padded straps instead of a stack of components — faster transfers and fewer adjustment points. Funding Coded HCPCS E0641. Zing publishes a funding guide and a Size 1 sample letter of medical necessity — ask us for both. The sibling question MPS TT or standard MPS Both pivot supine-to-prone, both abduct to 30° per leg, both take the tray. The difference is the back: the standard MPS Size 1 builds support pad by pad; the MPS TT starts with one large pad and adds components only where needed. Above this frame, MPS TT Size 2 continues to 60″ and 154 lb. The single-position Supine TT Size 1 costs less but cannot become multi-position later. Two ways to buy Itemised build or package An itemised build specifies every component. Two packages bundle tested combinations: Moderate Support — abduction mast, footplates and straps, knee pads, TT pad with hip supports and strapping, laterals, chest vest, head support, swing-away tray, push handle — or Maximum Support, adding Dual Control, lift lockout, directional locking caster, planar leg pads with calf pads, and swing-away knee pads. We can quote both. Features 01 · Two-Direction Pivot Flat-to-load supine through vertical to prone Load the child lying flat at a 32″ transfer height, then position anywhere from supine 0–90° to 20° prone-forward — no transfer, no flipping pads or trays. A built-in prone lockout prevents inadvertently passing vertical. Supine 0–90° Prone to 20° 32″ flat loading 02 · Tilt-Table Support One big pad, straps where pads would be A single 14″-wide planar pad in 14″, 16″ or 18″ heights supports pelvis and trunk as one surface, secured with padded strapping. It isn't either/or: hip supports, laterals, chest vests, planar leg pads and every MPS knee option add on where more support is needed. 14″/16″/18″ × 14″ TT pad Padded strapping MPS components add on 03 · Abduction & Everyday Use 30° per leg, tool-free, tray in reach With the abduction mast, one knob abducts the entire leg up to 30° per side (60° bilaterally) — footplates and knee pads travel with it. Every component adjusts tool-free; the gas spring takes optional Dual Control and a lift lockout; the 11″ × 19″ tray swings away either direction while staying attached, or lifts off. 30° per leg · 60° bilateral Tool-free knobs 11″ × 19″ swing-away tray 04 · Options & Upgrades Configure your Zing MPS TT Size 1 Over 70 components — the therapist's recommendation decides which. The main choices: Mast — standard, or with 30° leg abduction Frame colour — green, purple, orange or white, no charge TT pelvic/upper-body pad — 14″, 16″ or 18″ tall × 14″ wide, with strap options Footplates — three sizes from 6″ to 9.75″, plantar/dorsi ±20°, independent per foot Knee support — knee straps over planar leg pads, or knee pads in four inside widths, plus calf pads Leg supports — TT planar leg pads in 4″, 6″ or 8″ heights Positioning add-ons — hip supports, laterals in square, flat or curved pads, X-style chest vests, chest pads, straps Head support — planar 8″ × 8.5″ TT pad, two cushion sizes, or form-to-fit Tray & controls — 11″ × 19″ fixed, swing-away or clear; Dual Control, lift lockout, directional locking caster, push handle; hygienic covers in five patterns 05 · Before You Order Fit, configuration and safe use TT means one big pad plus strapping, not maximum segmental positioning out of the box. If support was specified pad by pad, compare the standard MPS Size 1 — we can quote both against the same recommendation. Leg abduction requires the abduction mast — the standard mast does not abduct. Every order requires a named ATP, and configuration comes from the treating therapist. Components have dependencies — knee straps match specific leg pads, posterior knee pads exclude leg supports and calf pads — and we check them on the quote. Limits: 44″ (112 cm) and 70 lb (32 kg). Above the range, MPS TT Size 2 continues to 60″ and 154 lb — near the boundary, call us. Read the owner's manual in full before first use. Standing programmes should be prescribed and supervised by the child's physician, physical therapist or occupational therapist. Morelli Medical supplies equipment and does not provide clinical assessment, prescribe therapy, or advise on standing protocols. Specifications Zing MPS TT Size 1 · PA5520TT Height Range Up to 44" (112 cm) Weight Limit Up to 70 lbs (32 kg) Approximate Age Range 9 months – 6 years Positioning Range (MPS) Supine 0–90° through vertical to 20° prone-forward, one motion; prone lockout built in Leg Abduction (with abduction mast) Up to 30° per side (60° bilaterally), single-knob, footplates and knee pads track Transfer Height (horizontal position) 32" (81 cm) Center of Pelvic Support to Footplate Range 7"–22" (18–56 cm), footplates may be inverted as necessary TT Pelvic/Upper Body Support Pad Single planar pad, 14" × 14", 16" × 14", or 18" × 14"; upper body support height range 4" TT Leg Supports Independent planar pads 4" × 6", 6" × 6", or 8" × 6", strap fits circumference to 15" Knee Pad Inside Widths 2.5", 3.25", 4.25" or 5"; depth range 5"; knee straps available matched to leg pads Footplate Options (L × W) 6" × 3", 7.75" × 3.25", or 9.75" × 4"; plantar/dorsi ±20°, fore/aft ±0.75", rotation 30° left/right Foot Straps 8" or 10" over arch; secure style in same lengths; forefoot control supports to 10" Tray (Shadow or Swing-Away) 11" × 19" molded or acrylic; swing-away fore/aft 4"–9", angle +40° to −90°; forearm wings and hand grips available Laterals, Hips & Chest Hip supports 6"–10" range, 3.5" × 3.5" pads; laterals 4"–8" or 7"–11" range in square, flat or curved pads, fixed or swing-away; chest pad 3" × 8"; X-style chest vests 9.5" × 9" or 11" × 9.5", stretch or non-stretch Head Supports (posterior) TT planar 8" × 8.5", cushions 5" × 8" or 6" × 10", or form-to-fit to 5" × 10"; height range 8", depth −2.5" to +1.5" Weight of Basic Unit 55 lbs (25 kg) Frame Footprint (caster to caster) 20" × 28" (51 × 71 cm); maximum dimensions 21.5" × 29.5" Lift Mechanism Foot-operated gas spring with built-in prone lockout; Dual Control (hand lever) and lift lockout options Casters 3" (8 cm); directional locking caster option Upholstery & Covers Black nylon/neoprene or molded urethane; hygienic covers in polyurethane laminate (ECO-PUL) Frame Colors Green, Purple, Orange, or White What's Included Every Zing MPS TT Size 1 is built to the therapist's configuration — the base frame plus one selection from each required category. Zing's default applies where none is specified. Included in every build (one selection per category): Base — PA5520 Zing MPS Tilt Table with foot-operated gas spring and prone lockout Frame colour — green (default), purple, white or orange, no charge Mast — PA5532 with leg abduction (default), or PA5530 standard Multi-adjustable foot plates with foot holders — 7.75" × 3.25" (default), 6" × 3", or 9.75" × 4" Knee support — knee straps matched to a planar leg pad, or knee pads in four inside widths TT pelvic/upper body support — single planar pad, 14" × 14", 16" × 14", or 18" × 14" Head support — TT planar 8" × 8.5", 5" × 8", 6" × 10", or form-to-fit Optional additions (per the therapist's build): Leg supports — TT planar leg pads 4" × 6", 6" × 6", or 8" × 6" (not available with posterior knee pads or calf pads) Tray — black molded, black molded swing-away, or clear swing-away, 11" × 19", with forearm wings and hand grips (small chest pad included at no charge with any tray) Lift and steering — Dual Control (push handle required), gas spring lift lockout, directional locking caster Positioning accessories — foot straps and forefoot control supports, calf pads, knee depth stops, hip supports, laterals in square, flat or curved pads, X-style chest vests with high-mount bracket, positioning belts and straps Hygienic covers — Rainbow Unicorn, Sea Creatures, Fancy Pants Elephants, Space Race, All Smiles Animals Push handle, tool pouch, angle locator Documentation & Manuals Official Zing (Altimate Medical) documentation: Zing Product Catalog — full range and options reference Zing Mini-Catalog Zing MPS TT Size 1 Owner's Manual — assembly, transfers, positioning and safe use Zing Size 1 Sample Letter of Medical Necessity — a starting draft for the funding submission Hip Surveillance Guide — the clinical case for abduction standing The Zing Advantage — clinical overview Parents' Guide to Early Intervention Standing Zing Funding Guide — E0641 coding and letter-of-medical-necessity support