Elceram ELC030 1/8th Nitride 220A Brushless ESC with LCD Display
NITRIDE 1/8 is an innovative electronic speed controller for sensored brushless DC motors, designed especially for the demanding conditions of 1/8th onroad racing, but perfect also for 1/8th offroad racing. Using Advanced Cooling Technology based on Aluminium Nitride Ceramic cooler, NITRIDE 1/8 has excellent thermal conductivity and can be used with powerful motors up to 2800 kV. NITRIDE 1/8 boasts a TFT LCD color display allowing quick and easy adjustment of all parameters, post-race data evaluation and self-diagnostics without the need for any other interface/device. In addition to the proven features, NITRIDE 1/8 is equipped with revolutionary new features: Revolutionary battery current and discharge real-time monitoring. Innovative Intelligent Algorithms to protect ESC in case of motor failure or mechanical issue. Post-race data saved after turn off. Connector for intelligent fan (if needed) and fan holder. Revolutionary motor analyzer function inside of ESC. Revolutionary brake softening function for high speed and low grip braking - do not loose the traction in the end of the straight! FW update function. LCD Display Like all ELCERAM ESCs, NITRIDE 1/8 features a LCD color display, allowing you to easily set all parameters and check all vital data directly at your ESC - no need to remember a programming card or mobile app. Everything you need is inside your ESC! With fantastic useability via 3 buttons, you can quickly set anything you need and one view is enough to check all parameters. Simple. Quick. Precise! Compact Form Factor Although it brings so many great innovative functions, NITRIDE 1/8 is a compact unit. Its dimensions are suitable for most of types of 1/8 onroad and offroad RC cars. In addition to that, 70% of weight is located at the bottom of ESC for even better stability of your car! Advanced Cooling Technology with Ceramic & Thick Film Technology Advanced cooling technology based on Aluminium Nitride Ceramic Cooler, developed especially for the NITRIDE series, provides the ESC with excellent thermal conductivity and long-term resistance to high temperatures and loads. Aluminium Nitride Ceramic improves efficiency by a further 15% compared to Aluminium Oxide. Easy Installation Installation of your NITRIDE 1/8 is quick and easy - you can stick it directly to the chassis using the recommended 3M GPH-110 double-sided tape which is included. If better cooling effect is desired, you can stick NITRIDE 1/8 on any thermal conductive plate (for example aluminium) in the car. NITRIDE 1/8 can be also installed using two M2.5 screws. They must always be fully screwed in and tightened enough to ensure heat transfer between ceramic cooler and aluminium ESC housing, even if using the double-sided tape. Power MOSFET transistors are attached on very thick silver layer with low resistance and high current capability. The silver layer is fired directly on the Aluminium Nitride Cooler using temperature above 850°C for excellent long-term reliability and thermal shock stability. The power stage - the heaviest component - is placed on the very bottom of the ESC for a super low centre of gravity (LCG). Features: ESC for sensored BLDC motors max. 2800 kV. Developed especially for 1/8th offroad RC cars. Reverse polarity protection. Intelligent algorithms for ESC protection. Fine throttle and brake adjustment for excellent feeling. TFT LCD color display with resolution 160 x 80 pixels, matte finish. Size: 50 (L) x 43 (W) x 28 (H) mm. Weight: 112 g without wires. Wires AWG10 - 200 mm. Power supply: 2S - 4S LiPo. ESC current cont. / pulsed: 220 A / 1500 A. BEC: 6 - 8,4 V adjustable, current cont. / pulsed: 6 A / 15 A. Extreme low internal resistance based on silver conductive layer. Advanced Cooling Technology based on Aluminium Nitride Ceramic Cooler. Enhanced water and dust resistance. Changeable cover. Connector for Intelligent fan and fan holder. ELCERAM fan included in the package. Functions: Revolutionary easy Rx calibration. Realtime monitoring: battery voltage, ESC and motor temperatures, motor diagnostics and more Revolutionary battery current and discharge monitoring. Revolutionary brake softening function. Revolutionary motor analyzer function. Pre-race diagnostics: motor temperature, sensor cable, bad motor, battery, BEC voltage and more. Post-race data evaluation. Easy programming: throttle, brake, boost and turbo timing, hall angle, BEC and many other functions. Continuous BEC voltage monitoring. Continuous motor speed monitoring. RPM limiter supported. Race data logging, temperature and other curves, histograms and more. Adjustable maintenance reminder for easy check. No programming interface needed.