2000-2002 Cummins Heavy Duty Steering Kit w/ Single KING Steering Stabilizer (8525-23)

Description The 8525-23 Heavy Duty Steering Kit by Synergy MFG is a larger, stronger bolt on replacement for the stock 2000-2002 Ram steering, with no drilling or reaming of the knuckles required. It uses the updated factory T-style design to eliminate the toe change caused by Y-style steering, without the induced bump steer of most crossover conversions, and adds a Synergy tuned King 2.0 stabilizer for premium damping. Part Numbers Included: 8567-12 Heavy Duty Drag Link 8568-22 Heavy Duty Tie Rod 4050-50 Steering Stabilizer Clamp 6410-01 Synergy Tuned King 2.0 Steering Stabilizer Features Drag Link Precision bent to clear factory axle brackets and compatible from stock to 4" of lift (over 4" requires a drop pitman arm). Made from 1-1/2" x .250 wall USA made DOM. Synergy Double Adjuster Sleeve allows adjustment without removing it from the vehicle. Two stage abrasion resistant powder coat finish. Comes with Synergy HD metal on metal tie rod ends. Tie Rod Engineered and bent from 1-1/2" x .188 wall heat treated 4130 chromoly, over 200% stronger than OEM. Bent to clear sway bar mounts, differential cover and steering pitman arm. Provides 2" of additional ground clearance over the stock tie rod. Single plane tie rod ends eliminate tie rod flop and the dead spot when changing direction. Fully sealed by forged pinch bolt housings and a complete welded assembly. King 2.0 Stabilizer and Clamp Synergy tuned King 2.0 steering stabilizer, valved for the weight and steering geometry of the Ram Cummins. Fabricated 4050-50 clamp mounts the stabilizer to the 1.5" Synergy tie rod and also accepts factory or aftermarket stabilizers using a 1/2" mounting bolt. Notes Compatible with Ram 3500 4x4 Cab and Chassis models of the same generation. Not compatible with 4500 / 5500 models. Synergy MFG cannot guarantee fitment with all aftermarket differential covers. If the cotter pin does not engage the castle nut on install, a washer is required. This varies by knuckle casting and wear. This steering kit will only work on solid axle Ram 1500 4x4 models. Known compatibility with the Mag Hitec differential cover. Installation Click Here For Installation Instructions