POWRIG Aluminum Cage for Insta360 X6

POWRIG Aluminum Cage for Insta360 X6 The POWRIG AC-X6 is a machined aluminum alloy cage built for creators who mount the Insta360 X6 on helmets, handlebars, gimbals and need it to come off again in one second. It turns the camera into a rigged shooting platform for action sports riders, motovloggers, real-estate and virtual-tour shooters, and anyone running lights or microphones on a 360 camera. Key Advantages One-press quick release — Press the red latch with your thumb and the frame springs open; press it closed and it locks. Swap batteries or pull the camera for a dive housing without unscrewing anything. Original magnetic base retained — The magnetic quick-mount base and its 4-pin charging contacts pass straight through the cage, so Insta360 mounts and the power selfie stick keep charging the camera while it is caged. Cold shoe on top — Mount an LED light, shotgun mic or wireless receiver directly above the lens instead of hanging it off a separate bracket. Open-frame aluminum, 70 g — Large cutouts leave both lenses, the touchscreen, all buttons and the USB-C port clear, and let the X6 dump heat during long 5.7K and 8K takes. Specifications Model AC-X6 Compatibility Insta360 X6 camera only Material Aluminum alloy Size 61 × 28 × 112 mm / 2.4" × 1.1" × 4.4" Weight 70 g / 0.15 lb Locking One-press spring latch, tool-free Cold Shoe 1 × standard cold shoe (top) Thread 1 × 1/4"-20 (bottom) Magnetic Base Pass-through with 4-pin charging contacts What's in the Box 1 × POWRIG AC-X6 aluminum cage Accessory Compatibility Insta360 power selfie stick Yes — magnetic base and 4-pin contacts stay exposed, charging works with the cage on Insta360 magnetic quick-release mounts Yes — original base geometry is preserved Cold shoe lights, mics, receivers Yes — one standard cold shoe on the top bar Tripods, monopods, gimbals, arms Yes — via the 1/4"-20 thread on the base GoPro-style three-prong mounts Yes — with a separate 1/4" to three-prong adapter, not included Insta360 X5, X4, X3, X2 No — the AC-X6 frame is cut for the X6 body only Waterproof dive housings No — remove the cage before sealing the camera in a dive case Shooting Notes Load the camera by pressing the latch open, seating the X6 against the base plate, then closing the latch until it clicks. Keep the seam of the frame perpendicular to the two lenses — the open-frame profile sits outside the field of view, so 360 stitching, horizon levelling and reframing in Insta360 Studio behave exactly as they do on a bare camera. For helmet and handlebar work, thread the 1/4"-20 base onto a rigid mount and add a tether through one of the side cutouts. Pair it with a POWRIG action cam accessory for lights and clamps, and see the aluminum cage for Insta360 X3 or the 60m diving case for Insta360 X5 if you shoot on an older body or underwater.