FPV Power Splitter (1-to-3)

FPV Power Splitter (1-to-3) You asked… we delivered 🩸 Tired of juggling plugs and powering one setup at a time? Our FPV Power Splitter (1-to-3) lets you run multiple devices off a single power source — clean, simple, and exactly how your pit setup should be. Check Out what HornyCoRn says about the ViFLY whoop Charger ... https://photos.app.goo.gl/CwknHxFGFpmfkJNW8 ⚡ What it does 🔌 Split one DC power source into 3 outputs 🏁 Perfect for whoop charging setups 💡 Ideal for LED gates / bench builds 🧱 Solid molded connectors — no flimsy junk 🔧 Specs Connector: 5.5 × 2.1mm DC barrel Config: 1 Female → 3 Male Use Case: 12V–16V DC systems 👉 Pair this with a proper USB-C PD adapter and cable for best performance. ⚠️ Heads Up – Power Supply Matters When running multiple devices, your power source needs to handle the total load. 👉 If you’re using a USB-C setup, make sure you’re using: A USB-C Power Delivery (PD) wall adapter (20W–45W+) A USB-C to USB-C cable rated for 60W–100W Not all USB-C chargers are created equal — lower power adapters or cheap cables may not provide enough output and can cause chargers to not power on properly. ⚠️ When using this 1-to-3 splitter, you’re running multiple devices from a single power source. 👉 Make sure your power supply can handle the total combined load of everything connected. For best performance, we recommend: A reliable 12V power adapter Or a USB-C to barrel cable paired with a high-output USB-C power brick ⚡ Example: If each device draws 1A, running 3 devices = 3A total required Running an underpowered supply can result in: Dim LEDs Flickering Devices not powering on 🧠 Pro Tip When in doubt… go bigger on the power supply, not smaller. Clean power = clean performance 🩸 https://photos.app.goo.gl/CwknHxFGFpmfkJNW8